HARDWARE - CRUSH WASHERS, FASTENERS, STAINLESS KITS
| 95100116 | Aluminum seal washer, 6mm, fork drain, metal carb inlet | 0.35 | |
| 13934700 | fiber seal washer, 6mm for fork drain plug, plastic carb inlet | 0.30 | |
| 10528900 | Aluminum seal washer, 10mm for drains & level plugs | 0.35 | |
| 95100313 | fiber seal washer, 10mm for overflow and drain plugs | 0.35 | |
| 95100709 | Aluminum seal washer, 20mm for engine oil drain, filler plugs/etc | 0.45 | |
| 25656102 | Aluminum seal washer, 10mm oil line to cylinder head, square fins | 0.50 | |
| 12006400 | Aluminum seal washer, 12mm, oil return in bellhousing | 0.35 | |
| 12154200 | Aluminum seal washer, 8mm oil pressure feed round fins | 0.39 | |
| 14018400 | wave washer, 10mm, cylinder head studs | 0.38 | |
| 14615901 | Schnoor washer, 8mm, hardened lock washer, various applications | 0.50 | |
| B2836/6 | Schnoor washer, 6mm, hardened lock washer, various applications | 0.35 | |
| 93110060 | Rubber washer for M6 bolts, various rubber mounted applications | 0.50 | |
| 25656100 | Copper crush washer, 10mm Brembo, brake lines | 0.40 | |
| 40673 | Flywheel bolt, hardened 10.9, 8mm 1.25x25 | 0.65 | |
| 61270300 | Wave washer, 8mm | 0.35 | |
| 95000213 | M12 flat washer, engine mounting bolt | 0.75 | |
| KZF | Flywheel retaining fastener kit - hardened bolts & lockwashers | 6.50 |
New Stainless Steel Fastener Kits
No more rusty fasteners. Stainless steel nut, bolt, and washer kits specific to these Moto Guzzi big twin applications. Feel free to call to ask about your application.

KZAC Alternator cover kit, for alternator covers without spacers $3.95
KZACS Alternator cover kit, for alternator covers with cooling spacers as shown $3.95
KZTIMING Timing chest cover, most Tonti frames, all bolts in timing cover as shown $11.95
KZLFTIMING Timing chest cover, loop frame models (hex head bolts) $11.95
KZSM Starter motor retaining kit, for securing Bosch and Marelli starters $6.95
KZTRIPL Triple clamp and front axle pinch bolts, most Tonti frames '75 to early 80s $16.50
KZLFTRIP Lower triple clamp bolts, loop frame, (this kit is carbon steel) 80mm variant $11.95
KZHC Handlebar clamp kit, most Tonti frames 1975 through 1984 with standard clamps, no instrument mounts $5.95
KZDUALD Full set of non stainless brake disk retaining bolts for dual disk, Borranni wheels - $16.50
KZEF Exhaust flange kit (head pipe to cylinder head most 1975-2005) acorn nuts and washers $11.95
KZRD Rear drive box to swingarm kit, all models except spine frames, acorn nuts and washers $11.95
KZRDRSUMP Rear drive sump, Eldorado & 850T (not shown) $4.95
KZVC Valve cover kit, does both valve covers on all big twins 68 to current $11.95
KZVCFG Valve cover kit, for valve covers with the MG CYCLE thick fin guards $11.95
KZBH Engine to transmission bell housing kit, acorn nuts and washers $18.50
KZ5SPCVR Transmission cover, all 5 speed transmissions through 1993 $7.50
KZDIST Dual point Marelli distributor kit, all external distributor base and cap bolts $4.95
KZED Ambassador/Eldorado twin instrument (speedo/tach) console kit, retaining acorn nuts, washers $3.95
KZFF Front fender kit, V7Sport/T/T3/G5/Convert through 1978 $4.95