hoses fittings
Brembo steel banjo bolt 10mm x 1.00 pitch
Part number: 06222839
GU95990028, GU95990033 Genuine Brembo steel banjo bolt 10mm by 1.00 thread pitch, fits vast majority of Brembo brake components. The 1.00... more info
$5.57
Brembo banjo bolt, single, 10mm x 1.25 pitch
Part number: 06222841
Bright nickel plated Brembo single banjo bolt , 10mm x 1.25 pitch. Fits many Guzzi components, generally splitters, unions and junctions junctions on... more info
$4.61
Brembo bright plated banjo bolt 10mm x 1.0 thread
Part number: 06222847
GU95990028, GU95990033 Genuine Brembo bright nickel plated single banjo bolt 10mm x 1.00 thread pitch . These bolts are very bright, almost... more info
$6.68
Brake hose front master cylinder to right caliper 850 Lemans
Part number: 14657150
Rubber brake hose, front master cylinder to right front caliper on 850 LeMans, banjo fitting on both ends, approximately 27 inches overall. more info
$67.70
Brake hose, rubber, V7 Sport 850T lower, 19", banjo banjo
Part number: 14657500
Rubber brake hose from junction block to caliper on disk brake V7 Sport, 750S, and 850T, banjo fitting on each end, approximately 19" overall. Also... more info
$53.62
Rubber brake hose, LF Caliper 850 LeMans V50 V50 II
Part number: 14658850
Rubber brake hose for left front caliper to rigid tube on 850 LeMans, V50 and V50 II, banjo on one end, female at the other, approximately 26.5"... more info
$78.86
Left front brake hose, metal line to caliper, Cal II ~71.5cm
Part number: 14658851
Rubber brake hose, left front hose for rigid tube to brake caliper on California II, banjo fitting on one end, female threaded on the other,... more info
$76.85
Magnum BYO stainless brake hose, 6 foot section
Part number: 17412461
Magnum Build Your Own DOT approved braided stainless brake hose only, 6 foot section.Use only with Magnum brand fittings, which are not included. No... more info
$25.16
Magnum BYO stainless brake hose, 12 foot section
Part number: 17412462
Magnum Build Your Own DOT approved braided stainless brake hose only, 12 foot section. Use only with Magnum brand fittings, which are not... more info
$47.66
Magnum BYO brake banjo fitting 180 degrees (straight) 10mm
Part number: 17420298
Magnum BYO brake banjo fitting 180 degree angle (straight). No more guessing pre-cut hose lengths, simply assemble these brake hoses and fittings on... more info
$18.86
Magnum BYO brake banjo fitting 35 degrees 10mm
Part number: 17420299
Magnum BYO brake banjo fitting 35 degrees angle. No more guessing pre-cut hose lengths, simply assemble these brake hoses and fittings on the bike... more info
$19.76
Magnum BYO brake banjo fitting 60 degrees 10mm
Part number: 17420300
Magnum BYO brake banjo fitting 60 degree angle. No more guessing pre-cut hose lengths, simply assemble these brake hoses and fittings on the bike for... more info
$17.96
Magnum BYO brake banjo fitting 90 degrees 10mm
Part number: 17420301
Magnum BYO brake banjo fitting 90 degree angle. No more guessing pre-cut hose lengths, simply assemble these brake hoses and fittings on the bike for... more info
$18.86
12mm Magnum BYO brake banjo fitting 35 degrees
Part number: 17420303
12mm Magnum BYO brake banjo fitting 35 degrees angle. This 12mm is a unique size used on the rear brake hose on many V11 California models with... more info
$19.76
12mm Magnum BYO brake banjo fitting 90 degrees
Part number: 17420304
12mm Magnum BYO brake banjo fitting 90 degrees angle. This is a unique size used on the rear brake hose to the proportioning valve 03657500 on many... more info
$20.66
Magnum BYO brake banjo fitting 15 degrees offset 10mm
Part number: 17420317
Magnum BYO brake banjo fitting 15 degrees offset. No more guessing pre-cut hose lengths, simply assemble these brake hoses and fittings on the bike... more info
$19.76
Black Magnum BYO brake banjo fitting 180 degrees (straight) 10mm
Part number: 17420319
Black Magnum BYO brake banjo fitting 180 degree angle (straight). No more guessing pre-cut hose lengths, simply assemble these brake hoses and... more info
$20.66
Black Magnum BYO brake banjo fitting 35 degrees 10mm
Part number: 17420320
Black Magnum BYO brake banjo fitting 35 degrees angle. No more guessing pre-cut hose lengths, simply assemble these brake hoses and fittings on the... more info
$21.56
Black Magnum BYO brake banjo fitting 60 degrees 10mm
Part number: 17420321
Black Magnum BYO brake banjo fitting 60 degree angle. No more guessing pre-cut hose lengths, simply assemble these brake hoses and fittings on the... more info
$20.66
Black Magnum BYO brake banjo fitting 90 degrees 10mm
Part number: 17420322
Black Magnum BYO brake banjo fitting 90 degree angle. No more guessing pre-cut hose lengths, simply assemble these brake hoses and fittings on the... more info
$19.76
Black Magnum BYO stainless brake hose, 6 foot section
Part number: 17420333
Black Magnum Build Your Own DOT approved braided stainless brake hose, 6 foot section only. No more guessing pre-cut hose lengths, simply assemble... more info
$26.06
Black Magnum BYO stainless brake hose, 12 foot section
Part number: 17420334
Black Magnum Build Your Own DOT approved braided stainless brake hose only, 12 foot section. No more guessing pre-cut hose lengths, simply assemble... more info
$53.06
Magnum BYO brake chrome 3 way manifold
Part number: 17420445
Magnum BYO chrome 3 way manifold. Join 3 hoses together or split 1 hose 2 ways with this single fitting. Assembles in 5 minutes or less with only... more info
$44.06
Brake hose M/C to union V7Sport, M/C to R caliper V50s
Part number: 17657101
Rubber brake hose, multiple applications, master cylinder to rear caliper on V50, V50 II, V50 III, V50 Monza, V65SP. Updated number replacing... more info
$56.69
Rubber brake hose, F MC to RF Caliper SP-LM III, banjo-male 28"
Part number: 17657161
Rubber brake hose, front master cylinder to right front brake caliper on 1000SP, LeMans II, CX100 and LeMans III, banjo fitting at master cylinder... more info
$58.26
Brake hose, rear G5 T3 SP LeMans 1/2/3 R front T3 G5
Part number: 17657550
Rubber brake hose from the rear junction block to the metal brake pipe for the rear caliper on many models, including California II, G5,... more info
$77.99
Brake pipe right front T3 Convert G5
Part number: 17658050
GU17658050 Rigid brake tubing connects rubber hose to right front caliper on 850T3, Convert, G5. more info
$28.09
Brake hose master cyl to splitters banjo-banjo GU17658550
Part number: 17658550
Rubber brake hose, banjo fitting on each end, approximately 16" long. Used from the rear master cylinder to junction block on many models,... more info
$40.19
Brake pipe, rear LeMans 1/2/3 CX T3 SP G5 GU17658650
Part number: 17658650
Rigid brake tubing connects rubber hose to rear caliper on 850 LeMans, LeMans II, CX100, LeMans III, 850T3, T4, T5, Convert, G5, CX100, Mille GT,... more info
$43.54
Brake pipe, long on frame T3 LeMans 1/2/3 SP Cal2 CX Convert
Part number: 17658750
Long rigid brake tubing along the upper frame rail on many models with integrated braking system from 1976 through 1986. 850 T3, T4, Convert, G5, 850... more info
$46.40
Brake hose, rubber, integrated left front T3 G5 Convert
Part number: 17658850
Rubber brake hose from the long rigid tube to the left front brake caliper when mounted in front of the fork as on 850T3, T4, Convert and G5. Female... more info
$83.02
Brake hose to left caliper LeMans 2/3 SP CX Cal 2/3 V65s
Part number: 17658860
Rubber brake hose from rigid brake pipe to left brake caliper when located in back of fork leg, 1000SP, LeMans III, LeMans II, CX100, California III,... more info
$51.17
Brake pipe, left front, T3 T4 Convert G5
Part number: 17658950
GU17658950 Rigid brake tubing connects rubber hose to left front caliper on 850T3, T4, Convert, G5 more info
$36.51
Rubber brake hose, upper, Police T3/G5/Convert, Cal 2
Part number: 18657140
Rubber brake hose, front master cylinder to junction block/splitter on lower triple tree. Used on 850T3 with Police or California handlebars, Covert... more info
$141.04
Brake hose front master to junction block T3 Convert G5 Police
Part number: 18658560
Brake hose, front master cylinder to junction block on lower triple tree, T3, Convert, G5, when equipped with Police or California handlebar.... more info
$46.74
Rubber brake hose, right front V50, V50II, V35
Part number: 19657100
Rubber DOT approved brake hose for V35, V50 and V50 II, right front brake. Approximately 32.5 inches, female straight on one end, female low angle on... more info
$43.37
Master cylinder Y junction small twin V35, V50s, V65s
Part number: 19668000
Master cylinder Y junction V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, V65 Lario, carbed Nevada 750s. One into two brake hose ... more info
$46.12
10mm copper crush washer, Brembo, brake lines
Part number: 25656100
10mm internal diameter copper crush washer ( sealing washer ) for brake hose and brake banjo bolt applications. Altternative to the aluminum version... more info
$1.63
Brake union, 1 into 1, brake hose junction block
Part number: 300033502
1 into 1 aluminum brake line junction block with 6mm mouting hole. This items has standard 10mm x 1.00 thread pitch so accepts brake banjo bolts. Use... more info
$38.17
Brake union, 3 way junction block, Daytona, Centauro, 1100 Sport
Part number: 31656860
Brass 3 way brake hose junction block or brake line union, original to early spine frame models Daytona, Centauro, 1100 Sport, but useful ... more info
$24.48
Rubber boot for brake line at master cylinder GU39663801
Part number: 39663801
850T3, T4, T5, Convert, G5, California II, California III, California 1100, 850 LeMans, LeMans II, CX100, LeMans III, LeMans 1000 all years LeMans IV... more info
$4.78
Double banjo bolt, 10mm x 1.00
Part number: 9930331C
Double banjo bolt, 10mm x 1.00 fits into all Brembo brake components with 1.00 thread pitch, allows connection of 2 brake hoses to brake components.... more info
$14.36
Goodridge double banjo bolt, 10 x 1.25
Part number: 9930332C
Goodridge double banjo bolt, 10 x 1.25 with crush washers. Secures two brake hoses with banjo fittings to one component. Includes 3 copper sealing... more info
$11.66
Stainless brake hose kit V65SP Special Order only
Part number: MG588
Stainless brake line kit for V65SP. Replace all your old rubber hoses with this kit. Brake hose kits replace original equipment rubber brake hoses in... more info
$170.37
Stainless brake line kit for V65 Lario
Part number: MG5891
Stainless brake line kit for V65 Lario. Brake hose kits replace original equipment rubber brake hoses in original brake system configurations only.... more info
$170.37
Stainless brake line kit T3, Convert, G5 low bar
Part number: MG590
NOTE: This kit may come in black or clear coating/jacket (stainless look). If the color matters to you, please email us BEFORE YOU PLACE YOUR... more info
$274.72
Stainless brake line kit, T3, Convert and G5 with Police bars
Part number: MG591
Brembo MotorQuality Stainless brake line kit, 850T3, Convert, or G5 with California or Police handlebars. Stainless brake hose kits replace... more info
$164.41
Stainless brake line kit, 850 LeMans 1976-1978
Part number: MG593
Spiegler Brake hose kit Moto Guzzi 850 LeMans 1 Stainless brake line kit, 850 LeMans. B rake hose kits replace original equipment rubber... more info
$176.12
Stainless brake hose kit, California II
Part number: MG594
Stainless steel braided brake line kit for California II. B rake hose kits replace original equipment rubber brake hoses in original brake... more info
$210.34
Stainless brake line kit LeMans III 1983-1984
Part number: MG597
Stainless brake line kit 850 LeMans III. Brake hose kits replace originalequipment rubber brake hoses in original brake system configurationsonly. If... more info
$273.43
Stainless brake hose kit LeMans II, CX100
Part number: MG598
Stainless braided brake line kit for 850 LeMans II and CX100. Reduce flex and improve feel and braking efficiency. Brake hose kits replace original... more info
$150.81
Stainless brake hose kit 1000SP II, 850T5
Part number: MG599
Stainless brake line kit SP II, some 850T5. Brake hose kits replace original equipment rubber brake hoses in original brake system... more info
$273.43
Stainless brake hose kit LeMans1000 1985-1987
Part number: MG600
Stainless brake line kit LeMans 1000 (LM4). Reduce flex and improve feel and brakign efficiency. Brake hose kits replace original equipment rubber... more info
$174.35
Stainless brake line kit for California III
Part number: MG604
This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the... more info
$165.69
Brembo Motorquality Stainless brake line kit Mille GT
Part number: MG605
Brembo Motorquality branded stainless brake line kit for Mille GT, 1987 to 1991. Reduce flex and improve feel and braking efficiency. Brake hose kits... more info
$154.89
FREN TUBO STAINLESS BRAKE LINE KIT, SP1000
Part number: MG650
Made by Fren Tubo Stainless steel braided brake line kit for 1977-1984 SP1000. Translucent tinted plastic covering to protect from rubbing... more info
$186.43
