All Products
large oval patch ~8 inches
Part number:
Large embroidered oval patch, Moto Guzzi red oval with metallic gold trim, ~8 inches wide, ~4 inches tall. Great on soft bags, back of jackets, more info
$7.89
Italian flag patch, large about 4.5 inches
Part number:
Italian flag inspired patch that is approximately 4.5 inches wide. This patch would fill the front of a cap, or fit normally on a jacket sleeve or more info
$5.99
Small engine shaped patch
Part number:
Small engine shaped patch, with eagle and the green, white and red of the Italian flag, 3.5 inch width
$5.99
Moto Guzzi V8 motorcycle swe-on patch
Part number:
Embroidered patch of the legendary Moto Guzzi V8 motorcycle. Nicely detailed image with metallic green and silver thread gives this patch a little more info
$5.25
5 eagle decals, black and gold
Part number:
This is a sheet of 5 seperate black and gold eagle decals. Two of the transfers are ~98mm wide and intended for the fuel tank with the eagles facing more info
$13.88
red Guzzi engine patch, rectangle 3.5 x 4.5 inches
Part number:
red Guzzi engine patch, rectangle, 3.5 inches by 4.5 inches, embroidered, silver is metallic thread
$1.98
Guzzi engine patch
Part number:
Guzzi engine patch, metallic silver thread, about 3.5 inches in diameter.
$1.98
embroidered Guzzi engine patch, black on red, small rectangle
Part number:
Embroidered Guzzi engine patch, black on red, metallic silver thread. Smaller sized patch, approximately 2.5 inches by 1.75 inches.
$1.98
Moto Guzzi 85th Anniversary commemorative pin, 1921 - 2006
Part number:
We uncovered a few of these commemorative lapel pins left over from the 85th Anniversary of the company Moto Guzzi, 1921 - 2006. Pin it on more info
$4.47
Head gasket, oval push rod holes for Gilardoni T T3 Eldo Amb
Part number:
Head gasket for use with Gilardoni cylinders using oval push rod galley holes, when installed on 850T, T3, Eldorado, 850GT, V750 Special, more info
$15.79
Galletto rooster decal, multi color transfer
Part number:
This is the Galletto rooster decal asfound on the leg shield of the Galletto scooter. Multi colored stickercan be covered by clear coat, or simply more info
$7.98
Decal, 1100 Sport fairing, black and silver, 4.5"
Part number:
Decal, 1100 Sport fairing, black and silver, 4.5 inch. Designed to have a clear coat applied over the top.
$9.46
Fuel tank decal set, 1996-2002, black and silver, pair
Part number:
Black and silver fuel tank decals as used on several models from 1996-2002. Jackal, Quota ES, 1100 Sport Injected, V11 Sport, California Special, more info
$21.07
Decal, fuel tank Cal 1100, black and gold, 6.5", pair
Part number:
Decal, fuel tank Cal 1100, black and gold, 6.5", left and right pair
$24.11
Ambassador two-cylinder piston set
Part number:
PLEASE NOTE THESE CYLINDER SETS ARE IMPACTED BY THE 50% STEEL/ALUMINUM TARIFF, AND THE PRICE REFLECTS THESE COSTS AND INTERNATIONAL SHIPPING CHARGES more info
$1,490.58
Polished header pipes Daytona, 1100 Sport, and Centauro
Part number:
Completely stainless steel manifolds specific for Moto Guzzi Daytona, 1100 Sport, and Centauro Increased internal head diameter: better flow more info
$476.01
Satin finish header pipes Daytona, 1100 Sport, and Centauro
Part number:
Completely stainless steel manifolds specific for Moto Guzzi Daytona, 1100 Sport, and Centauro Increased internal head diameter: better flow more info
$476.01
Mistral crossover for Daytona, Centauro, 1100 Sport 1991-1998
Part number:
Mistral performance crossover for all 1991-1998 Daytona, Daytona Racing, Centauro, Sport 1100, and 1100 Sport. These crossovers are time more info
$369.93
Pair of Gilardoni 850T, 850T3, Eldorado cylinder piston sets
Part number:
One pair (2 cylinders/ 2 pistons) of Gilardoni 850T, 850T3, 850GT, Eldorado cylinder and piston sets in original 83mm bore size. Latest casting more info
$780.91
Piston ring set, 83mm bore
Part number:
Three ring piston ring set for one 83mm piston as used in Gilardoni kits for many 850cc engines including 850GT, Eldorado, 850T, 850T3, 850 LeMans, more info
$59.25
Piston ring set, 88mm bore
Part number:
Three ring piston ring set for one 88mm piston as used in Gilardoni kits for many 1000cc engines including Convert, 1000SP, V1000G5, and CX100, as more info
$70.54
Piston and Cylinder Set for LeMans 1000 1986-1993
Part number:
New production piston and cylinder set for LeMans 1000 1986-1993 ( LM4, LM5). Each set includes 1 new nickel silicon platedcylinder, 1 more info
$345.46
Side cover decal V65 Lario
Part number:
As original "V65 Lario" sidecover transfer, decal, sticker. These transfers are applied by removing the backing sheet of paper, pressing more info
$12.20
G&G deep sump with recessed external oil filter
Part number:
Complete SD-TEC external oil filter relocation kit includes deep sump, oil filter, oil pan gasket, drain plug and sealing washer, and oil filter more info
$853.31
Black G&G deep sump with recessed external oil filter
Part number:
Complete black painted SD-TEC external oil filter relocation kit includes deep sump, oil filter, oil pan gasket, drain plug and sealing washer, and more info
$832.33
passenger seat for mounting on luggage rack
Part number:
This is a passenger seat originally produced for old Guzzi single cylinder models (Galetto, Airone and Falcone) that attaches direclty to the luggage more info
$103.68
Mistral head pipe set, Quota 1100 ES polished finish
Part number:
Polished finish stainless steel pair of head pipes for Quota 1100ES from Mistral. Large 45mm OD single wall head pipes fit great, are lightweight, more info
$276.39
Mistral head pipe set, Quota 1100 ES satin (matte) finish
Part number:
Satin (matte) finish stainless steel pair of head pipes for Quota 1100ES from Mistral. Large 45mm OD single wall head pipes fit great, are more info
$276.39
Mistral 2 into 1 polished crossover, Quota 1100 ES
Part number:
Mistral stainless steel crossover for Quota. Many Quotas have already had their original unit replaced with one of these robust, free flowing more info
$477.29
Mistral 2 into 1 satin/matte crossover, Quota 1100 ES
Part number:
Mistral stainless steel crossover for Quota. Many Quotas have already had their original unit replaced with one of these robust, free flowing more info
$477.29
Fuel line connection elbow, internal fuel pump models 2003-20
Part number:
Plastic hose connection and fuel tank outlet internal fuel pump quickconnect coupling. This is the little plastic hose connection thatis easy to more info
$36.95
Malossi velocity stack, aluminum, PHF carbs, long 50mm
Part number:
Malossi spun aluminum velocity stack for Dellorto PHF carburetors as used on Guzzi, Ducati, Laverda and no doubt other applications. Threads directly more info
$90.16
Black Mistral stainless exhaust crossover LeMans 1000
Part number:
Black Mistral stainless steel exhaust crossover ( H ) pipe for LeMans 1000 1985-1993. High tech, high temp black finish. Slight upward and outward more info
$221.13
Mistral stainless crossover for LeMans 1000, polished
Part number:
Mistral polished stainless steel exhaust crossover ( H ) pipe for LeMans 1000 1986-1993. Slight upward and outward angle to fit these models with more info
$209.32
Mistral stainless crossover for LeMans 1000, satin
Part number:
Mistral satin stainless steel exhaust crossover ( H ) pipe for LeMans 1000 1986-1993. Slight upward and outward angle to fit these models with medium more info
$208.12
Black Mistral head pipe set LeMans 850, LeMans III, LeMans 1000
Part number:
Black Mistral header pipe set for LeMans 850, LeMans II, CX100, LeMans III, LeMans 1000 and 1000S. Durable high tech, high temperature black finish. more info
$442.26
Mistral POLISHED head pipes LeMans 850, LeMans III, LeMans 1000
Part number:
Mistral head pipe set for LeMans 850, LeMans II, CX100, LeMans III, LeMans 1000 and 1000S. These are very nice head pipes, lightweight, smooth bends, more info
$377.22
Mistral SATIN head pipe set LeMans 850, LeMans III, LeMans 1000
Part number:
Mistral head pipe set for LeMans 850, LeMans II, CX100, LeMans III, LeMans 1000 and 1000S. These are very nice head pipes, lightweight, smooth bends, more info
$377.22
Black Mistral crossover for 850 LeMans LeMans II CX100 LeMans 3
Part number:
Black Mistral stainless steel crossover for 850 LeMans, CX100, LeMans II, and LeMans III. High tech, high temperature black finish. Use only with more info
$221.13
Mistral POLISHED stainless crossover 850 LM LM II CX100 & LM III
Part number:
Mistral polished stainless steel crossover for 850 LeMans, CX100, LeMans II, and LeMans III. For use with Mistral head pipes and Mistral more info
$208.12
Mistral SATIN stainless crossover 850 LeMans LM II CX100 & LMII
Part number:
Mistral satin/matte stainless steel crossover for 850 LeMans, CX100, LeMans II, and LeMans III. For use with Mistral head pipes and Mistral more info
$208.12
Malossi velocity stack, aluminum, PHM Dellorto carbs
Part number:
Malossi spun aluminum velocity stack for Dellorto PHM carburetors as used on Guzzi, Ducati, Laverda and other brand bikes. Threads directly to more info
$79.23
Hydraulic clutch slave cylinder assembly for 5 speed big twins
Part number:
Hydraulic clutch slave cylinder assembly for most Guzzi big twins with 5 speed transmissions. Replace the clutch cable with a hydraulic system of more info
$263.79
Repair kit: seals and orings kit for hydraulic clutch slave cyl
Part number:
Replacement seal and oring kit for hydraulic clutch slave cylinder assembly (MG5050). Includes 2 piston orings and 2 shaft seals.
$39.47
Gasket set V65C, V65SP
Part number:
Prepackaged Italian g asket set complete for V65C and V65SP. This set is gaskets only for rear drive, transmission, and engine. No rubber seals or more info
$80.74
Gasket set V700
Part number:
Prepackaged Italian g asket set for V700 includes gaskets for engine, transmission and rear drive. No rubber seals or orings are included in the more info
$110.90
Gasket set V50, V50 II
Part number:
Prepackaged Italian g asket set for V50 and V50 II. Includes gaskets for engine, transmission and rear drive. No rubber seals or orings are included more info
$86.18
Gasket set V50 III, V50 Monza
Part number:
Prepackaged Italian g asket set for V50 III, and V50 Monza includes gaskets for engine, transmission and rear drive. No rubber seals or orings are more info
$78.91
Gasket set Cal 1100, 1100 Sport carb EV Jackal Bassa Quota ES
Part number:
30999060 GU30999060 Prepackaged Italian g asket set for 1100cc square head models California 1100, EV, EV Touring, Jackal, Bassa, California more info
$62.22
Gasket set Daytona 1000
Part number:
Prepackaged Italian g asket set Daytona 1000. Engine, transmission and rear drive. No rubber seals or orings are included in the gasket kits. Also no more info
$72.36
Knee guard pair, round fins with VHB 14941450 14941050
Part number:
GU18941450 GU18941050 Pair of knee guards for all big twins with VHB carbs, can be mounted either vertically or horizontally, whichever better fits more info
$35.44
Windshield, vintage police style with chrome trim & beaded edge
Part number:
Vintage police style windshield with chrome trim and beaded edge. This universal windshield can be adapted fairly easily to 1967-1974: V700, more info
$320.07
Windshield bracket set, California II 1984-1987
Part number:
Windshield bracket set, California II 1984-1987, upper mounting bracket set attaches windshield.
$45.60
Decal, California 2 side cover, red and gold
Part number:
Decal, California 2 side cover, red and gold, sold each
$8.37
Fuel tank decal, V7 Sport, pair
Part number:
These are the fuel tank decals as used on V7 Sport, sold in pairs, one for the left side of the tank, one for the right. Vinyl transfers, clear coat more info
$34.99
Moto Guzzi Integral Braking System sticker
Part number:
Fuel tank sticker saying: "The Moto Guzzi Integral Braking System" and "A true revolution in motorcycle safety". However - these more info
$8.91
5 eagle transfers, decals, older style, black and gold
Part number:
This is a sheet of 5 seperate black and gold "pre-war" or pre-1940s style eagle decals. Two of the transfers are ~103mm wide and intended for the more info
$18.85
Stainless brake line kit T3, Convert, G5 low bar
Part number:
NOTE: This kit may come in black or clear coating/jacket (stainless look). If the color matters to you, please email us BEFORE YOU PLACE YOUR more info
$259.59
Stainless brake line kit, T3, Convert and G5 with Police bars
Part number:
Stainless brake line kit, 850T3, Convert, or G5 with California or Police handlebars. Stainless brake hose kits replace original equipment more info
$271.76
Stainless brake line kit, 850 LeMans 1976-1978
Part number:
Spiegler Brake hose kit Moto Guzzi 850 LeMans 1 Stainless brake line kit, 850 LeMans. B rake hose kits replace original equipment rubber more info
$176.12
Stainless brake hose kit, California II
Part number:
Stainless steel braided brake line kit for California II. B rake hose kits replace original equipment rubber brake hoses in original brake more info
$210.34
Stainless brake line kit LeMans III 1983-1984
Part number:
Stainless brake line kit 850 LeMans III. Brake hose kits replace originalequipment rubber brake hoses in original brake system configurationsonly. If more info
$273.43
Stainless brake hose kit LeMans II, CX100
Part number:
Stainless braided brake line kit for 850 LeMans II and CX100. Reduce flex and improve feel and braking efficiency. Brake hose kits replace original more info
$301.36
Stainless brake hose kit 1000SP II, 850T5
Part number:
Stainless brake line kit SP II, some 850T5. Brake hose kits replace original equipment rubber brake hoses in original brake system more info
$273.43
5 speed transmission seal kit for all 5 speed big twins
Part number:
Gasket, seals and orings kit to seal up a 5 speed transmission on any big twin. Fits all big twin 5 speeds from 1972 V7 Sport through 2013 California more info
$76.68
Stainless brake hose kit LeMans1000 1985-1987
Part number:
Stainless brake line kit LeMans 1000 (LM4). Reduce flex and improve feel and brakign efficiency. Brake hose kits replace original equipment rubber more info
$174.35
Stainless brake line kit for California III
Part number:
This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$289.87
Brembo Motorquality Stainless brake line kit Mille GT
Part number:
Brembo Motorquality branded stainless brake line kit for Mille GT, 1987 to 1991. Reduce flex and improve feel and braking efficiency. Brake hose kits more info
$262.23
FREN TUBO STAINLESS BRAKE LINE KIT, SP1000
Part number:
Made by Fren Tubo Stainless steel braided brake line kit for 1977-1984 SP1000. Translucent tinted plastic covering to protect from rubbing more info
$302.14
Mistral crossover Breva 750 and Nevada 750 Classic
Part number:
Mistral crossover for Breva 750 and Nevada Classic 750IE (injected). Eliminate the restriction of the third muffler on these models. Larger original more info
$82.50
Mistral low pipes for Nevada Classic 750 with saddlebags
Part number:
Mistral low pipes for Nevada Classic 750IE with saddlebags. Stainless steel reverse cone mufflers mount more horizontally to provide increased more info
$660.00
Tarozzi passenger foot peg, complete with mount - pivot, each
Part number:
Tarozzi passenger foot peg, completewith mount and pivot. These are sold individually, you need to order two of them to make a set. The mounting bolt more info
$68.63
CARC protector Breva Stelvio Norge Griso
Part number:
CARC protector for Breva, Stelvio, Norge, Griso, Bellagio, all models with CARC final drive. Black coated steel tube design.
$140.21
Taller windscreen for Stelvio 1200, not US model NTX
Part number:
Italian made tall windscreen for early Stelvio 1200 models. Does not fit most Stelvio NTX. Heavy 4mm thick. 23 inches top to bottom, 18 inches wide more info
$143.89
Taller windscreen with lip for Norge 1200 8V 2010 to 2016
Part number:
Tall windshield with turned up lip for 2010 and later Norge 1200 8V. Heavy duty poly 4.25mm thick. Overall height is 25.25 inches top to bottom, and more info
$113.03
Windscreen for Breva 750, clear
Part number:
Windscreen for Breva 750, clear, height from top of headlight opening to top of screen is ~10.125 inches. No hardware required, this item more info
$132.14
Chrome crash bar V7 V7II V7III V9 2004-2020
Part number:
PLEASE READ BEFORE PURCHASING: Imperfections are considered normal and should be expected on this small batch part. Cosmetic blemishes such as more info
$234.82
Black crash bar V7 V7II V7III V9 2004-2020
Part number:
PLEASE READ BEFORE PURCHASING: Imperfections are considered normal and should be expected on this small batch part. Cosmetic blemishes such as more info
$209.78
aluminum alternator cover for many big twins
Part number:
Early style, deep dish, chrome plated, cast aluminum alternator cover for big twins with Bosch, Saprisa, or Ducati Energia alternators. Fits 1972 V7 more info
$137.11
All Balls steering head bearing kit Griso Stelvio V7850 V85 V100
Part number:
All Balls steering head bearing kit for V7III, V7 850, V9, V85TT, V100, Griso 1100, Griso 1200 8V, Breva 1100, Breva 1200, Sport 1200, Stelvio, more info
$57.29
FAC fork damper set for V65 Lario - Special order only
Part number:
FAC fork damper set for V65 Lario, special order only. This part is a Special Order item. Due to limited demand, we do not normally stock it. more info
$300.99
FAC fork damper set LeMans 850 1976-1978
Part number:
FAC fork dampers LeMans 850 1976-1978. Far superior to the original "Sebac" cartridge dampers. These dampers are unique to the LeMans 850 to more info
$317.41
FAC fork damper set 1985-1987 LeMans 1000, early Cal III
Part number:
This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$329.78
FAC fork damper set V50 Monza, V50III
Part number:
FAC fork damper set V50 Monza, V50 III. Use with progressive spring set 300082319. NOTE: This damper set is a special order item. Please read more info
$290.36
FAC fork damper set, SPII, T5 3rd series
Part number:
FAC fork damper set, SP II and 850 T5 3rd series, (all with 38mm fork tubes). When used in the 3rd series T5, there is not a separate damper rod more info
$457.11
FAC fork damper set, T5 1st and 2nd series
Part number:
FAC fork damper set, 38mm fork, 850 T5 first and second series. These dampers work with the original removable damper extension rod, used on these more info
$491.64
FAC fork damper set SP3 Cal3 LM5 CAL 1100
Part number:
FAC fork damper set SP III, 1990-93 California III, LeMans 1000 1988-1989 LeMans V, 1000S 1991-1993, California 1100 1994-1997, models with stock more info
$586.68
FAC fork damper set T3, SP, LM3, Cal2, G5, CX
Part number:
FAC fork damper set for early Tonti models. Specifically for 1979 through 1984 models, but suitable for 1975 through 1978 when used with appropriate more info
$417.47
FAC fork damper set for V50 and V50 II
Part number:
FAC fork damper set for V50 and V50 II, use progressive spring set 300082319 with these dampers. This part is a Special Order item. Due to more info
$486.41
FAC fork damper set, V65C, V65SP
Part number:
FAC fork damper set, V65C and V65SP, use progressive fork spring pair 300082315 for best performance. NOTE: This part is a Special Order item. Due more info
$453.10
FAC fork damper set 1000S, LeMans 1000 from 1990 and later
Part number:
This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$586.68
Lights horn turn signal Universal Yamaha left handlebar switch
Part number:
Modern day reproduction of a vintage left side handlebar switch as used by Yamaha. This compact switch has a metal body with controls for headlight more info
$42.26
muffler clamp Norge Stelvio/NTX Breva 1100/1200 alter: 976521
Part number:
Aftermarket 58mm stainless steel exhaust clamp suitable for muffler on Norge, Norge 1200 8V, Stelvio, Stelvio NTX, Breva 1100, Breva 1200, Sport more info
$22.46
parody decal, bird man
Part number:
Parody decal, bird man. You may recognize him. Vinyl sticker, black on white, 97mm tall.
$6.29
Mistral crossover 2013-2016 V7 Racer, V7 Special, V7 Stone
Part number:
Mistral polished stainless steel crossover for 2013-2016 V7 Stone, V7 Special, V7 Racer, and all V7 II models that do not use the crossover lambda more info
$81.18
Petcock Update Kit - 750 Ambassador, 850 Eldorado
Part number:
This kit updates the fuel valves on 750 Ambassador and 850 Eldorado fuel tanks to a later, next generation type of fuel valve that was used on later more info
$110.21
EBC 300mm Pro-Lite brake disc pair 1000SP 850-T3 Cal2
Part number:
EBC Pro-lite full floating rotors, 300mm. Stainless steel brake disks on gold anodized aluminum carriers. These disks fit many 1970's and early more info
$440.00
fork boot kit, fork gaiters for 32-38mm fork tubes
Part number:
Fork gaiter kit protects fork tubes and prolongs the life of fork seals. Fits fork tubes from 32 to 38mm, and lower fork leg castings 48 to 55mm. more info
$24.26
Mistral black paint Slip-On mufflers V7 Cafe
Part number:
Mistral stainless steel conical slip-on muffler set for V7 Cafe. Black painted stainless steel . The upswept reverse cone muffler design more info
$824.67
