All Products
16mm ID crush washer oil line/breather hose fittings GU10154200
Part number:
Aluminum crush washer, 22mm OD and 16mm ID. Used on various oil breather and oil cooler plumbing fittings as well as engine drain plugs on several more info
$1.90
Dellorto 10238-34 bowl nut PHM late PHF using 20mm washer
Part number:
Dellorto number 10238-34 bowl nut, PHM & late PHF carbs, using a 20mm sealing washer These items are rarely requested and as such are available more info
$19.87
brake lever Brembo round master cylinders 1970s-1980s PS12 PS15
Part number:
Polished slim brake lever for the early, round reservoir Brembo hand master cylinders as used by Ducati, Moto Guzzi, and Laverda. This lever is more info
$31.20
brake lever Brembo round master cylinders 1970s-1980s PS12 PS15
Part number:
Black slim brake lever for the early, round reservoir Brembo hand master cylinders as used by Ducati, Moto Guzzi, and Laverda. This lever is more info
$20.83
Brake lever, black "dog leg" round Brembo master cylinders
Part number:
Black version of the curved "dog leg" hand brake lever for Brembo round reservoir master cylinders as used by Moto Guzzi, Ducati, and other Italian more info
$30.96
brake lever screws kit, 12mm round hand master cylinder
Part number:
brake lever screws kit, 12mm round hand master cylinder Moto Guzzi: V50 Monza, V50III, 850T3, SP1000, Convert, V1000 G5, 850 LeMans, LeMans II, more info
$9.52
Brake fluid elbow and seal for remote reservoir master cylinders
Part number:
63140081A Brembo 110312720 brake fluid elbow and seal for remote reservoir master cylinders found on select models. This is the more info
$8.97
Brembo fluid reservoir, Ducati, Guzzi, 45ml 10444661 30655000
Part number:
GU30665000, superseding Brembo 10444661 V11 Sport, V11 LeMans, Ducati, Aprilia, Benelli, Bimota, Cagiva, 58540181A Brembo remote brake fluid more info
$29.25
Brembo sight glass, master cylinder reservoir
Part number:
Brembo sight glass for master cylinder reserviors on rectangular master cylinders. Diameter of visible lens is ~14mm.
$11.52
Brembo hand brake master cylinder, 16mm
Part number:
Brembo hand brake master cylinder, 16mm. This master cylinder is used to operate two 4 piston calipers on motorcycle without integrated front/rear more info
$218.22
Passenger seat with grab handle, Nuovo Falcone
Part number:
Nuovo Falcone Militare passenger seat with passenger grab handle.Sturdy chrome plated steel rail, thick seat foam, vinyl cover andMoto Guzzi more info
$300.49
Brembo 13mm clutch master cylinder Ducati SS, Monster Paso 851
Part number:
63040031A 10467017 Brembo 13mm left hydraulic clutch master cylinder, black lever. Can be used on Moto Guzzi with hydraulic clutch slave more info
$185.49
10mm alu sealing washer for overflow and drain plugs
Part number:
10mm internal diameter aluminum sealing washer with large 17mm outer diameter commonly used for 10mm oil drain plugs as used on engines, more info
$1.24
Instrument console, seat pivot, 13.75mm shock rubber bushing
Part number:
GU10502250, GU14502250 13.75mm inside diameter rubber bushing, used as dash console rubber mount bushing on V7 Sport, 750S, 850T, T3, Convert, more info
$4.37
Windscreen for Police "buffalo" fairings with edge trim 12577250
Part number:
This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$120.45
Brake cable for Nuovo Falcone
Part number:
Brake cable for Nuovo Falcone. NOTE: This item available by special order only, please read store policies regarding special orders and allow more info
$31.80
7" LED headlight 55/60 watt equivalent
Part number:
7 inch round LED headlight provides light equivalent of DOT compliant 55/60 watt halogen. This 7 inch headlight has the 3 alignment tabs that ensure more info
$218.04
Nuovo Falcone brake light switch
Part number:
Brake light switch for Nuovo Falcone. NOTE: This item is not kept in stock, and is available by special order. Please see Store Policie for more more info
$55.06
Italian Ambassador Eldorado Ducati tail light lens w/ reflector
Part number:
079574380 Italian CEV 9181 tail light lens for V700, Ambassador, and Eldorado, 1969-1971 V750 Special, 850GT, with built in rectangular more info
$9.25
console light fixture Ambassador Eldorado Nuovo Falcone
Part number:
Idiot, console, or dash board light holder for Ambassador, Eldorado, and Nuovo Falcone. This is the base for the dashboard warning lights. more info
$19.35
Instrument console indicator Amber lens Ambassador Eldorado
Part number:
Instrument console indicator "idiot" light lens in amber/orange. Ambassador, Eldorado, V750 Special, 850GT and Nuovo Falcone. Generally used for more info
$19.71
Instrument console indicator Blue lens Ambassador Eldorado
Part number:
Instrument console indicator "idiot" light lens, blue. Ambassador, Eldorado, V750 Special, 850GT and Nuovo Falcone. Generally used on Police single more info
$19.71
Light bulb socket for all glass wedge base bulbs
Part number:
Also found as part number 14768650 or 17760650. Instrument console light bulb socket, bulb holder, for "wedge" or "spade" base bulbs 17762150, more info
$6.00
Speedometer cable, 500 Nuovo Falcone
Part number:
Speedometer cable for 500 Nuovo Falcone. ~90cm sheath, ~93cm inner Note: stock photo may not match actual item NOTE; THIS ITEM IS AVAILABLE BY more info
$14.14
compression release cable, Nuovo Falcone
Part number:
Compression release cable for Nuovo Falcone 1971-1974. This is an excellent quality, heavy duty Italian made cable. .
$12.54
valve spring compressor, big twins.
Part number:
valve spring compressor, for removing and installing valves in big twin cylinder heads.
$74.48
5 eagle transfers, black and white
Part number:
This is a sheet of 5 seperate black and white eagle decals. Two of the transfers are ~98mm wide and intended for the fuel tank with the eagles facing more info
$20.85
Dellorto 1104 cable adjuster, VHB VHBZ PHF PHBH M6x19mm
Part number:
GU12937200, 12937200 Cable adjuster for top of VHB and VHBZ square slide, flat top PHF and PHBH round slide carbs. Original Moto Guzzi part more info
$3.00
Brembo 13mm master cylinder kit EV Jackal Bassa Ducati clutch
Part number:
62640021A 800047276 Brembo 110436250 13mm hand master cylinder repair kit. For all 1998 and later V11 California 1100cc models using 13mm more info
$29.72
Dellorto 11084 mixture screw for PHF & PHM GU30936210
Part number:
Dellorto mixture screw fitting PHF 30, 32, 34, 36 and PHM 38, 40 and 41 carbs. Original to California 1100 carb, 1100 Sport carb, big valve more info
$11.73
Brembo RCS fluid reservoir mounting kit
Part number:
Brembo RCS fluid reservoir mounting kit, includes bracket, hose, clamps, fasteners and reservoir - specifically for RCS brake radial pump master more info
$62.00
Plastic manifold, PHF30, eliminates rubber boot, each
Part number:
Delrin plastic intake manifold for PHF30, eliminates rubber boot, sold each Incompatible with stock air filter boxes and some sidecovers. Intended more info
$63.97
Plastic manifold, PHF36, eliminates boot, each
Part number:
Delrin plastic intake manifold for PHF36 carbs eliminates rubber boot, sold each, order 2 to mount 2 carburetors on a Guzzi. Incompatible with stock more info
$63.95
Plastic manifold, PHM40, eliminates boot, each
Part number:
Delrin plastic intake manifold for PHM40, eliminates rubber boot, sold each Incompatible with stock air filter boxes and some sidecovers. Intended more info
$64.19
Dellorto 11773 needle clip, needle plate PHM 38 40 41
Part number:
Dellorto number 11773 needle clip or plate for PHM 38, 40 and 41carbs
$3.94
Dellorto 60/3 slide for PHM carburetors
Part number:
New version genuine Dellorto 60/3 slide for PHM38 and PHM40 carburetors. Note: See the "old slide" vs "new slide" comparison photos. On all new more info
$107.47
Timing cover gasket, most big twins GU12001200
Part number:
Timing cover gasket, nearly all big twin Guzzis 1967 thru 2005. V700, V750 Special, Ambassador, 850GT, Eldorado, V7 Sport, 750S, 750S3, 850T, more info
$6.18
Metal core timing cover gasket, Big Twins until 2009 GU05001230
Part number:
GU12001200 GU05001231 Steel core timing cover gasket suitable for nearly all big twin Guzzis 1967 thru 2009. These composite gaskets have a more info
$19.61
left handlebar switch, headlight, turn signals, horn, flasher
Part number:
Full featured left side handlebar switch is an excellent replacement for most all early models. Headlight on-off-high-low, turn left and right plus more info
$106.16
Oil drain plug with built in magnet GU12003702
Part number:
Oil drain plug with magnet to catch ferrous swarf. Fits most engine drain, rear drive fill, and transmission fill plugs, hex head uses standard Guzzi more info
$18.45
Oil drain plug, stainless steel, hex head, with hole
Part number:
Oil drain plug, stainless steel, hex head, with hole. Fits most engine drain, rear drive fill, and transmission fill plugs, hex head uses standard more info
$29.92
cam plug, all big twins
Part number:
Camshaft hole plug, all big twins 1967-2010. Plugs camshaft hole in rear of crankcase.
$6.38
Aluminum seal washer, 12mm ID GU12006400
Part number:
Aluminum sealing washer, 12mm internal diameter, for oil breather return pipe to sump on early big blocks, fuel filter banjo fitting on many injected more info
$0.58
Breather gasket in bell housing 1967-2005 Big Twins GU12007600
Part number:
Breather gasket in bell housing, used on most all 700, 750, 850, 1000 and 1100cc big twins from 1967 thru 2005. V700, V750 Special, Ambassador, more info
$3.63
Rear main bearing, standard, Big Twins 1967-2010 GU12011400
Part number:
Standard size rear main bearing, Big Twins from 1967 to 2010. V700, V750 Special, Ambassador, 850GT, Eldorado, V7 Sport, 750S, 750S3, 850T, more info
$241.92
Rear main bearing 1st undersize Big Twins 1967-2010 GU12011401
Part number:
Rear main bearing, 1st undersize (0.2mm) rear crankshaft bearing for nearly all big block big twin engines 1967 to 2010. V700, V750 Special, more info
$215.40
Rear main bearing 2nd undersize 1967-2010 Big Twins GU12011402
Part number:
Rear main bearing, 2nd undersize (0.4mm) rear crankshaft bearing for nearly all big block big twin engines 1967 to 2010. Note: this item is not more info
$211.88
Rear main bearing 3rd undersize 1967-2010 Big Twins GU12011403
Part number:
Rear main bearing, 3rd undersize (0.6mm) rear crankshaft bearing for nearly all big block big twin engines 1967 to 2010. Note: this bearing more info
$211.88
Rear main bearing carrier flange gasket Big Twins GU12011800
Part number:
Rear main bearing carrier flange gasket, most all big twins 1967 thru 2005. As original to: V700, V750 Special, Ambassador, 850GT, Eldorado, V7 more info
$2.78
Front main bearing standard, non-oil filter big twins GU12011900
Part number:
Front main bearing, standard size front crankshaft bearing for non-oil filter block big twins V7 Sport, 750S, V700, Ambassador, V750 Special, more info
$157.73
Front main bearing 1st under non-oil filter big Twins GU12011901
Part number:
Front main bearing, first undersize (0.2mm) front crankshaft bearing for non-oil filter block big twins V7 Sport, 750S, V700, more info
$120.24
Front main bearing 2nd under non-oil filter Big Twins GU12011902
Part number:
Front main bearing, second undersize (0.4) front crankshaft bearing for non-oil filter block big twins V7 Sport, 750S, V700, Ambassador, V750 more info
$159.94
Front main bearing 3rd under non-oil filter Big Twins GU12011903
Part number:
Third undersize (0.6mm) front main bearing (front crankshaft bearing) for non-oil filter block big twins V7 Sport, 750S, V700, Ambassador, V750 more info
$159.94
Oil pipe locating pin in front main bearing GU12012200
Part number:
Oil pipe restrictor pin for front main bearing, Big Twins 1967 to 2010. V700, V750 Special, Ambassador, 850GT, Eldorado, V7 Sport, 750S, 750S3, more info
$25.45
Fold over lock plate set front main bearing, early big twins
Part number:
Set of fold over locking plates for front main bearing bolts on models not originally equipped with oil filters. Fits V700, Ambassador, V750 Special, more info
$12.73
Right handlebar switch, engine start, engine on and off
Part number:
Right side handlebar switch is an excellent, cost effective replacement for many motorcycles where function rather than originality is desired. more info
$45.86
Access plug, trans-rear drive fill plug, allen head GU12022600
Part number:
This item is used as the 12 o'clock cylinder access plug in the cylinder head on most post-1974 2 valve per cylinder 850, 1000 and 1100cc models more info
$16.05
Valve cover gasket, round fin big twins GU12023700
Part number:
Standard thickness fiber valve cover gasket for round fin big twins 1967-1984: V700, Ambassador, Eldorado, 1969-1971 V750 Special, more info
$4.39
Premium quality thick valve cover gasket, round fin GU12023700
Part number:
Improved gasket material makes these thicker (0.8mm) fiber valve cover gaskets last longer and seal irregularities better than the standard valve more info
$4.26
Metal core valve cover gasket, round fin big twins GU12023700
Part number:
These composite gaskets have a steel core with a bonded exterior coating on both sides to assist sealing. Fits all round fin big twins 1967 through more info
$9.64
Rocker arm spindle Big Twin 2V Guzzis 1967 to 2010 GU12031800
Part number:
Rocker arm spindle, 2 valve per cylinder big twins 1967 thru 2010 : V700, V750 Special, Ambassador, 850GT, Eldorado, V7 Sport, 750S, 750S3, 850T, more info
$25.49
Valve adjustment screw, V700, Ambassador, Eldorado, V7 Sport
Part number:
Valve or rocker arm adjustment screw for early push rods as found on V700, Ambassador, Eldorado, V750 Special, 850GT, V7 Sport, 750S, and some early more info
$38.25
Split collet valve keeper 2 valve 700-1100s to 2004 GU12038100
Part number:
Split collet, valve keeper 2 valve per cylinder 700, 750, 850, 1000 and 1100cc big twins 1967 thru 2005: V700, V750 Special, Ambassador, 850GT, more info
$8.68
tappet, lifter, cam follower, V700 Ambassador Eldorado V7 Sport
Part number:
Aftermarket early version tappet (lifter) for the early type push rods as used on V700, Ambassador, Eldorado, and V7 Sport. Radius more info
$91.19
Cam retainer thrust flange, big twins 1967 to 2010 GU010540015
Part number:
Aftermarket camshaft thrust flange for big twins 700-1100cc, 1967-2010. This aftermarket camshaft retainer flange replaces the discontinued original more info
$77.33
Crankshaft plug, sludge trap plug GU12065400
Part number:
Crankshaft plug, sludge trap plug, used on big twin 700, 750, 850, 1000 and 1100cc models 1967 thru 1997. Exceptions are 1100 Sport carb and more info
$14.35
Flywheel for V700, Ambassador, Eldorado, V750 Special, 850GT
Part number:
Flywheel as used on V700, Ambassador, Eldorado, 1969-1972 V7 Special and 850GT. Big, heavy, steel flywheel weighing in at ~13 pounds, with 8 spring more info
$445.11
Fold over lock plate for hex head flywheel to crankshaft bolts
Part number:
Fold over locking plate for hex head flywheel to crankshaft bolts, V700, Ambassador, Eldorado, 1969-1972 V7 Special, 850GT, V7 Sport, 750S, 850 more info
$3.34
Flywheel bolt Big Twin to 2010, hardened 10.9 GU12067701
Part number:
Flywheel bolt for standard Big Twin Guzzi twin plate clutch flywheels through 2010, also used in the rear drive of early small twin V35s, V50s and more info
$1.69
shim, generator belt pulley, V700 Ambassador Eldorado
Part number:
Generator pulley shim for adjusting belt tension on V700, Ambassador, 1969-1972 V7 Special, 850GT and Eldorado. Stainless steel.
$7.74
Clutch input spline hub 4 Speeds V700, Amb, '69-72 V7 Special
Part number:
Clutch input spline, clutch hub, transmission input gear, for the 4 speed transmissions as found in V700, Ambassador, 1969-1972 V7 more info
$203.90
4 speed clutch hub, with deep splines for V700 and Ambassador
Part number:
Now you can use the newest clutch plate technology on your old 4 speed transmission. New "deep spline" clutch hub for 4 speed more info
$230.22
Clutch intermediate plate, middle plate alternate for GU12083200
Part number:
Clutch intermediate plate for all big twin dual plate clutch models. This standard replacement intermediate plate has been an outstanding performer more info
$36.67
Pressure plate cup, most Big Twin Guzzi 1967 to 2004 GU12082800
Part number:
Pressure plate cup, big twin 700, 750, 850, 1000 and 1100cc, 4 and 5 speed transmission models with twin plate clutches. From 1967 thru roughly 2004, more info
$44.46
Clutch pressure plate Big Twin Guzzi GU12082901
Part number:
GU12082900 Clutch pressure plate for all big twin Guzzi clutches using 8 springs and 2 clutch plates , spanning the years 1967-2010 in 700cc, 750cc, more info
$122.39
Clutch push rod 4 speed GU12085701
Part number:
Clutch push rod for most 4 speed transmissions, V700, Ambassador, 1969 to 1972 V7 Special, ~228mm long. This push rod fits all 4 speed transmissions more info
$33.10
Clutch inner body V700
Part number:
New clutch inner body for the early ~20mm 4 speed transmission as used on Moto Guzzi V700. Outside diameter at largest measure is ~19.66mm.
$29.74
clutch outer body V700
Part number:
New old stock original Moto Guzzi clutch outer body early 4 speed transmission as used on V700. Outside diameter ~19.9mm
$20.30
Throwout bearing early 4 speeds, 20mm
Part number:
Throwout bearing early 4 speeds, 20mm diameter. Replacement for caged ball throwout bearing found in V700s and early Ambassadors. Alternate for more info
$17.31
Clutch throwout bearing most 4, 5 and 6 speed trannys GU12087001
Part number:
Clutch pushrod bearing for most all 5 and 6 speed transmissions and late 4 speed transmissions, 22mm OD. Exceptions include early 4 speed V700 more info
$24.66
Clutch cable 1967-72 V700 Ambassador V7 Special standard length
Part number:
New and improved clutch cable for V700, Ambassador and V7 Special 1967-1972. All cable end barrels are soldered onto the inner wire, with no more info
$22.93
Metal block, V700 Amb Eld fuel tank bushing mount
Part number:
Metal block for fuel tank mount for Ambassador, Eldorado, 1969 to 1972 V7 Special, 850GT, and suitable for V700. This is the piece that holds more info
$18.28
Petcock, fuel valve Eldorado Ambassador V700
Part number:
Petcock, fuel valve, with 3 positions: on, off, and reserve. Thread size and pitch: M12 x 1.0. Specifically for Ambassador, 1969 to 1972 V7 Special, more info
$47.57
Petcock Installation Kit: 750 Ambassador, 850 Eldorado
Part number:
Petcock installation kit includes 8 thin metal indexing washers and 2 fiber sealing washers. It is designed to accompany the original style more info
$17.44
Air box assembly for original Eldorado, Ambassador, V700
Part number:
Air box assembly for original air cleaner on V700, Ambassador, Eldorado, 1969 to 1972 V7 Special, 850GT. All steel reproduction appears as original, more info
$127.51
Air filter Eldorado, Ambassador, V700, Nuovo Falcone
Part number:
Air filter for original air cleaner box on V700, Ambassador, Eldorado, 1969 to 1972 V7 Special, 850GT, Nuovo Falcone. Fibrous filter media over more info
$24.63
air box boot, rubber, V700-Amb with SS1
Part number:
Air box boot for V700 and early Ambassador when equipped with Dellorto SSI carburetors. Note: This item is not normally stocked but is available by more info
$214.23
Best quality air box boot, Eldorado Amb Dellorto VHB carbs
Part number:
GU12114301 Best quality rubber air box boot for Eldorado, Ambassador, V700, 1969 to 1972 V7 Special, 850GT, when equipped with Dellorto VHB more info
$33.57
Choke cable lower Eldorado Ambassador VHB carbs 12117001
Part number:
GU12117001 Lower choke cable for Eldorado, Ambassador, 1969 to 1972 V7 Special, 850GT with VHB carbs. Used on left and right side, from splitter more info
$10.86
Throttle cable, lower V700 Ambassador Eldorado 850GT V7 12117501
Part number:
GU12117501 Eldorado, Ambassador, V700, 1969 to 1972 V7 Special, 850GT, lower throttle cable from under tank splitter to carb, used on left and right. more info
$9.13
Exhaust nut clamp with cooling fins, Eldorado head pipe
Part number:
Head pipe retaining clamp with cooling fins as used on 1974 Eldorado to prevent loosening of the head pipe. This item snugs down onto the original more info
$68.08
Pair: chrome head pipes V700, 750 Ambassador, 850 Eldorado
Part number:
One pair of chrome plated steel head pipes for V700, 750 Ambassador, and 850 Eldorado. This set includes 1 left side 12120905 and 1 right side more info
$548.42
Crossover pipe between mufflers, V700 Ambassador Eldorado 850GT
Part number:
Exhaust crossover pipe as original on Eldorado, Ambassador, V700, 1969 TO 1972 V7 Special, 850GT. Fits between original type mufflers, improves more info
$37.63
Oil filter screen, V700 Ambassador Eldorado 850T V7 Sport 750S
Part number:
Oil filter screen as used on all loop frame models V700, Ambassador, Eldorado, 1969-1971 V7 Special, 850GT, also used on V7 Sport, 750S and most more info
$28.21
oil cleaner screen pickup gasket, non oil filter big blocks
Part number:
oil cleaner screen pickup gasket, V700, Ambassador, Eldorado, V750 Special, 850GT, V7 Sport, 750S, 850T without oil filter
$1.24
Oil delivery hose oil feed line V700 Ambassador Eldorado12153600
Part number:
Oil supply hose to the cylinder heads on al loop frame models V700, Ambassador, Eldorado, 1969-1971 V7 Special, 850GT. Steel tubing clears original more info
$52.86
8mm alu washer Oil lines Oil filter access cover GU12154200
Part number:
Internal diameter is 8mm on this aluminum sealing washer. These 8mm crush washers can be found somewhere on most every Guzzi model. Most more info
$0.52
8mm seal washer with rubber center sub for GU12154200
Part number:
8mm internal diameter steel sealing washer with rubber center, an alternative to the aluminum crush washer 12154200. Most commonly used on round head more info
$0.43
Oil pickup gasket, oil pipe across bottom non oil filter models
Part number:
Oil pickup gasket for oil pipe across bottom of engine case on V700, Ambassador, Eldorado, 1969-1971 V7 Special, 850GT, V7 Sport, 750S, and most more info
$2.13
