All Products
Alternator cover, plastic with vent GU18001650
Part number:
Plastic alternator cover for many models 1970s through 1990s. This alternator cover is shallow and designed for use with the ventilation spacer more info
$26.93
Head gasket for 88mm, Convert G5 SP CX100 GU18022050
Part number:
Head gasket for 88mm (1000cc), original to round head models Convert, V1000 G5, SP1000, CX100. Also earlier 850 models that have had 88mm so called more info
$14.93
Top end engine gasket set for 1000cc 88mm round heads
Part number:
Best quality top end gasket set for 1000cc (88mm) round head engines includes: 2 head gaskets, 2 base gaskets, 2 premium quality valve cover more info
$67.44
Classic Foam Hand Grips set
Part number:
Classic Foam Handgrips set from Parts Unlimited. Traditional barrel shape with a maximum diameter of approximately 37mm or nearly 1.5 inches. Shock more info
$9.86
Clutch plate kit, steel and friction plates, Convert Cal 2 Auto
Part number:
Clutch plate kit for V1000 Convert and California II Automatic. Includes all steel and friction plates GU18082350
$116.36
Throttle cable, some G5, Convert, T3, T4, VHB ~43 inch sheath
Part number:
GU18117560 Throttle cable for G5, Convert, T3, T4 when equipped with: civilian handlebars, VHB carburetors, and the original black plastic throttle. more info
$22.06
Throttle cable, black plastic throttle and VHB carbs, 46" sheath
Part number:
GU18117562 Throttle cable for black plastic throttle with VHB carburetors. This cable length is suitable for mid to large size handlebars and is more info
$12.12
18mm sealing washer CARC models Convert lambda plugs GU18144350
Part number:
~18mm crush washer or sealing washer used in many applications including: side fill plug on 6 speed transmission on CARC models, unused lambda plug more info
$6.44
14.5mm ID crush washerV7 series, Convert, V11 fuel filter nipple
Part number:
GU18161150 Aluminum sealing washer or crush washer with 14.45mm ID, many uses: Automatic transmission hose fitting used on Convert and California II more info
$2.46
Plastic bush, short fat shift and brake lever bushing GU18252050
Part number:
Replacement plastic bushing, short and fat shift and brake pedal bushing, mostly used on floorboard models, but also used on many others at the pivot more info
$7.78
Shift linkage complete, T3, LM1, rod and ball joint assembly
Part number:
GU18257801 Shift linkage complete, T3, 850 LeMans, rod and ball joint assembly. Ball joint, rod, lock nut, pin, and clevis for shift linkage. more info
$35.04
Ball joint for shift linkage, right hand thread AP8210007
Part number:
Ball joint for shift linkage, standard M6 right hand female thread, used on many models T3 through last of the V11 California series, 1400s and the more info
$16.24
driveshaft coupling sleeve, 20 tooth: V1000 Convert, Cal2 Auto
Part number:
20 tooth driveshaft coupler as used on V1000 I Convert, California II Automatic, and various T3 and T5 police and California III models when equipped more info
$65.28
Big side stand, T3, Convert, 850GT California, G5
Part number:
Yet another version of the big chromed side stand as used on V1000 I Convert, 850T3, 850GT California, and others. Any of these stands are also more info
$83.70
Double spring plate for sidestand GU18432760
Part number:
Double spring retaining plate, many side stands that use 2 side stand springs including G5, T5, California II, California III, California 1100, EV, more info
$6.83
Floorboard mat (1) with interlocking base GU18447050
Part number:
One rubber floorboard mat with tall ridges and big interlocking grooves on bottom side. These unusual mats were used on 1990's California III Classic more info
$18.84
Crash bar, T3 Police,V1000 Convert, V1000 G5
Part number:
Large "square" one-piece crash bar as used on V1000 I-Convert, V1000 G5, and 850 T3 when equipped with floorboards. Crashbar does not have the more info
$111.89
Rear crash bar pair, 850 T3 California, G5, Convert GU18458250
Part number:
GU18458850 One pair of rear crash bars as used on 850 T3 California, V1000 I Convert, and V1000 G5. These rear safety bars bolt on to early big twin more info
$91.19
Dual seat, V1000 G5, Convert, T4 1000SP T3 850T GU18460650
Part number:
Dual saddle for V1000 G5, V1000 I Convert, 1000SP, 850T4, and also a nice replacement for 850T and 850T3. This is a very nice quality reproduction more info
$523.38
Moto Guzzi decal for "Thermos lunchbox' top open saddlebag, T3
Part number:
Moto Guzzi decal for "Thermos lunchbox" top open saddlebag, T3, Convert, etc. Sold each. Decal is white and about 6 inches total length.
$13.68
Thermos saddlebag set T3 Convert G5 black fiberglass GU18482557
Part number:
Reproduction fiberglass saddlebag set for 850T3, Convert, G5 etc. These were used on many Guzzi models including many police and service more info
$369.42
Hinge, latch and lock set for T3 Convert G5 saddlebag
Part number:
Hinge, latch and lock set for T3 Convert saddlebag, fits the original, rectangular "thermos" style fiberglass saddlebags with the top openning. more info
$37.38
Saddlebag mount, right, T3 Police Convert G5 GU18485040
Part number:
Chrome plated tubular saddlebag mount, right side, T3 Police, Convert, G5, as original
$88.86
Saddlebag mount, left, T3 Police Convert G5 GU18486540
Part number:
Chrome plated tubular saddlebag mount, left side, T3 Police, Convert, G5, as original
$88.86
Mounting union, saddlebag mounts Convert T3 Police G5 GU18487740
Part number:
Mounting union, saddlebag mounts, Convert, T3 Police, G5, this piece connects the two sides of the saddlebag mounts together at the rear of the bike.
$20.66
Saddlebag union mounting bracket, to fender T3 Police Convert G5
Part number:
Saddlebag mounting bracket, to fender, T3 Police, Convert, G5. Attaches saddle bag bracket union 18487740 to the rear fender.
$9.82
Lower windshield mount kit: T3, Convert, G5
Part number:
Chrome plated lower bracket kit with clips to mount 18577251 windshield to T3, T4, Convert, G5, or 850T. Heavy duty, chrome plated steel more info
$43.17
Fork spring unit, dual rate, Cal2 G5 Mille GT GU18526960
Part number:
GU18526660 Two piece fork spring unit as used on California II, G5, SP1000, and 1987-1991 Mille GT. Two piece spring provides dual rate action, more info
$29.70
Fork spring spacer, 35mm with dual rate springs
Part number:
Fork spring spacer for dual rate spring 35mm Guzzi forks, this piece separates the two (18526960 and 18526660) springs and keeps them in alignment.
$8.91
Quality rubber u joint boot, rear disk brake big twin GU18548000
Part number:
Best OEM quality Italian production rubber boot for universal joint on rear disk brake Tonti frame models from T3 through California Vintage. These more info
$17.24
Rubber shock bushing T T3 G5 SP LeMans 1/2 Amb Eld V700
Part number:
GU18551650 Rubber shock bushing for original shock absorbers on 850T, T3, S3, T4, SP1000, Convert, G5, CX100, 850 LeMans, LM II, V700, 1969-1971 V750 more info
$2.63
OEM type windshield, 850T T3 Convert G5 T4
Part number:
Italian made original type windshield for 850T3, V1000 I Convert, V1000 G5, and 850T4. Also suitable for 850T. These are really nice windshields and more info
$149.71
Windshield clip kit, many models with oem shields
Part number:
Windshield clips kit for original version windshields as found on 850T3 California, V1000 I Convert, V1000 G5, and California II. These clips connect more info
$20.49
emgo muffler reducer set, one muffler min 38id max 45.4od 43od 4
Part number:
Emgo muffler reducer set for one muffler. This is a nested set of 3 spacer rings. These muffler reducers are handy for installing non-Guzzi more info
$10.76
242mm rear brake disk: T3 Convert G5 SP California II GU18635760
Part number:
242mm rear brake disk for early Tonti frame disk brake rear wheels: 850T3, Convert, G5, California II, 1000 SP, Mille GT, some T5. This is a one more info
$166.57
Brembo, F08 caliper, left
Part number:
Complete Brembo P2 F08 twin piston caliper. Fits front left when mounted in front of fork tube, fits front right when mounted behind fork tube. Fits more info
$155.93
"F09" caliper, rear or front right
Part number:
"F09" caliper, twin opposed 48mm pistons. This is a reproduction caliper based on the discontinued Brembo F09 from the 1970s and more info
$180.17
Brembo carbon ceramic pads for F09 caliper
Part number:
These brake pads are the latest evolution of the Brembo street bike pad compound for P2 F09 brake calipers. These pads are optimized for road more info
$28.07
Rubber brake hose, upper, Police T3/G5/Convert, Cal 2
Part number:
Rubber brake hose, front master cylinder to junction block/splitter on lower triple tree. Used on 850T3 with Police or California handlebars, Covert more info
$94.81
Brake hose front master to junction block T3 Convert G5 Police
Part number:
Brake hose, front master cylinder to junction block on lower triple tree, T3, Convert, G5, when equipped with Police or California handlebar. more info
$46.74
Brake rod T3 Cal and Police, Cal 2 and 3 Convert G5 Cal 1100
Part number:
Chrome plated brake master cylinder actuating rod from master cylinder to brake pedal. Used on floorboard models 850T3 FB, 850T3 California, T3 more info
$34.62
Turn signal stem for CEV black T3 G5 SP LM I/2 V50/2
Part number:
Hollow turn signal stem, black, many models with CEV turn signals. Metric thread is correct for use in original CEV and Aprilia headlights. These more info
$19.11
Rear turn signal mount T3 Convert G5 Cal II V65C GU18753501
Part number:
Rear turn signal mount for standard 10mmturn signals such as CEV. Italian reproduction of item as used on850T3, T4, Convert, V1000 G5, California II, more info
$37.91
Workshop engine stand
Part number:
Workshop engine stand for big twins. Upper frame for supporting oil pan measures 240mm by 260mm, cradle for transmission is adjustable up and down. more info
$79.72
Side cover emblem, V1000 G5 GU18922001
Part number:
Aluminum badge or emblem for the V1000 G5 side cover. Use badge clip part number 39922200 for mounting
$23.88
Crank ring nut tool Bosch alt crank, 6 sp trans input GU18927650
Part number:
Specially hardened tool to remove the crankshaft ring nut (93601026) on models with Bosch or Saprisa alternator crankshafts. This tool is deep enough more info
$53.64
Replacement rubber knee pad GU18941750
Part number:
***NOTE: We only have one of these left and do not expect any more*** Replacement rubber pad for knee all knee guards using this style of pad.
$3.95
Timing cover gasket 887003 V50s V65s V7s V7 IIs V7 IIIs V9s
Part number:
Timing cover gasket for all small twins: V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, Lario, V7 Classic, Breva 750, Nevada, Nevada Classic more info
$6.35
Oil Pan Gasket 887004 V50 V65 750 Breva V7 Classic, Racer
Part number:
Oil Pan Gasket small twins V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, V65 Lario, Florida, Breva 750, Nevada, Nevada Classic IE, , V7 more info
$2.80
Grommet, alternator wire through alternator cover, all models
Part number:
Grommet, alternator wire through alternator cover. Suitable for all models with crank mounted alternator. Original to Mille, California III, SP III, more info
$9.90
OEM Ducati clutch kit, 900SS, Monster, ST2, ST4, 916
Part number:
Genuine original Ducati 16 plate clutch kit, 7 friction plates, 9 steel plates, fitting the following models: Ducati 748 `99 SPS Ducati 748 SP, more info
$215.43
OEM Ducati clutch kit 750 / 907 Paso, 1991 750 SS F1, 851, 888
Part number:
Genuine original equipment Ducati 14 plate clutch kit with 7 friction plates and 9 steel plates, fitting the following models: Ducati 750 Paso 1984 - more info
$196.97
OEM Ducati aluminum clutch kit, 748 - 1098, GT/Sport/1000
Part number:
Genuine Ducati original aluminum16 plate clutch kit fitting the following models: Ducati 999 Ducati 1000 SS i.e. Ducati Monster 1000 `03 Ducati more info
$207.33
Base gasket V50III V65C V65SP V65TT Lario GU19020820
Part number:
Cylinder base gasket, V50III, V65C, V65SP, V65TT, Lario.
$5.64
Head gasket, V35
Part number:
Head gasket, V35 series. This item is available by special order, allow additional 2 to 3 weeks for delivery.
$16.56
Head gasket V50 III, Monza GU19022082
Part number:
Head gasket for V50 III and V50 Monza,formerly 19022081
$16.86
Valve cover gasket V50s V65s V7s V7 IIs Stone Racer GU19023700
Part number:
Premium quality valve cover gasket for most small twins: V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, V750 Breva, Nevada, Nevada Classic, V7 more info
$3.24
Exhaust gasket V65s V7s V7 IIs Racer Breva Stone GU19025280
Part number:
Exhaust gasket for V65C, V65 Lario, V65SP, V65TT, Breva 750, Nevada, Nevada Classic, V7 Classic, V7 Cafe Classic, V7 Racer, V7 Racer II, V7 Special, more info
$2.94
Vibration damper for cylinder fins, V50s V65s V7 Classic 1100s
Part number:
GU19025300 Rubber vibration damper for small twins V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, Lario, Strada, 1100 Sport carbed, California more info
$4.81
Rocker arm oil fitting Breva V7 Classic Stone Racer Special
Part number:
GU19027500 2B000579 Rubber oil fitting for rocker arms, all small twins except Lario. Models include V35, V50, V50 II, V50 III, V50 Monza, V65 C, V65 more info
$14.55
Intake Valve V65C V50III Monza GU19036082
Part number:
Intake Valve for V65C, V50III and V50 Monza
$25.33
Exhaust valve V65SP V50III V50 Monza
Part number:
Exhaust valve for V65SP, V50III, and V50 Monza. ~30.5mm, quality Italian stainless steel valve.
$27.29
Valve guide seal V50s V65s V7s V7IIs Stone Racer Spec GU19037820
Part number:
Valve guide seal, small blocks, V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, Lario, Nevada, Nevada Club, V7 Classic, Nevada Classic IE, more info
$3.45
Timing chain V503 V65s Nevada Breva V7 V7II V7III GU19058021
Part number:
Timing chain for V50 III, V50 Monza,V65 C, V65 Florida, V65 Lario, V65 SP, V65 TT, Nevada, Nevada ClassicIE, Breva 750, V7 Classic, V7 Cafe Classic, more info
$150.58
Piston ring set most V35
Part number:
This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$49.89
Piston ring set V50 V50 II V50 III Monza GU19060650
Part number:
Piston ring set for 1 piston as used in V50, V50 II, V50 III, V50 Monza . Iron rings for 74mm bores.
$66.71
Piston ring set most V65s, 80mm bore
Part number:
GU19060663 This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$42.65
Piston pin circlip, V65 series 1981-1995
Part number:
Piston pin circlip, V65, V65SP, V65C, V65 Lario, V65 TT, V65 NTX, V65 Florida
$2.91
Set of 4 con rod shells V50 Monza V50III standard size
Part number:
This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$105.99
Connecting rod bolt set Lario, Breva, V7 Classic Stone Special
Part number:
Set of 4 original Guzzi connecting rod bolts, V65 Lario, V65 TT, GT, Breva 750, Nevada Classic IE, V7 Classic, V7 Cafe, V7Special, V7 Special II, V7 more info
$37.03
Clutch cable with adjuster V50, V50II, some V50III-Monza
Part number:
GU19093051 Clutch cable, with built in adjuster, V50, V50 II, and some V50 III and V50 Monza. If your small block Guzzi V50, V50 II, V50 III, or more info
$40.79
Clutch cable V50III, Monza, V65 SP, '86 Lario, no adjuster
Part number:
GU19093052 Clutch cable V50 III, Monza, V65SP, '86 Lario, no adjuster. If your small block Guzzi V50 III or Monza uses a clutch cable with no more info
$19.69
Fuel tank rubber strap, small twin V35 V50s V65s
Part number:
Fuel tank retaining strap, rubber strap with 2 pins, small twins V35, V50, V50 II, V50 III, Monza, V65C, V65SP, Lario
$12.11
Air box rubber strap, filter housing V65 V65C V65SP V65 Lario TT
Part number:
Air box rubber strap, air filter housing on many models of V65 and V75 including: Lario, V65TT, V65C, V65SP, Nevada Club, NTX, etc. This rubber strap more info
$2.98
Intake rubber sleeve V50 III Monza V65C SP Lario TT GU31114383
Part number:
GU19114360 Intake rubber sleeve, V50 III, V50 Monza, V65C, V65SP, V65 Lario, V65TT, early Nevada 750. Superseding numbers 31114383, 19114680
$10.86
Gasket, intake manifold, V35 V50 V50II with VHBZ carb
Part number:
Gasket, intake manifold, V35, V50, V50 II with VHBZ carburators
$4.75
Intake manifold gasket, V50III Monza V65C SP TT Lario GU19115580
Part number:
Gasket, intake manifold, V50III, Monza, V65C, V65SP, V65TT, Lario, early Nevada 750
$4.07
Throttle cable, V50 V50 II GU19117550
Part number:
Throttle cable, V50, V50 II. Some Guzzi parts references indicate that this cable is used on some V65TTs. For comparison purposes, this cable has more info
$13.32
Throttle cable V50III V65SP Eldorado Civ Amal carbs GU19117580
Part number:
Throttle cable for V50 III and V65SP. This cable is also a good fit for 850 Eldorado when equipped with standard or "civilian" handlebars and more info
$12.97
throttle cable V65C Eldorado Police Amal carbs GU19117595
Part number:
throttle cable, V65C. Also Eldorado with Police handlebars, Amal carbs, and nameless unmarked 2 cable throttle.
$11.49
Choke cable, right, V35s V50s V65s GU19133500
Part number:
Choke cable, right, V35, V50, V50 II, V50 III, Monza. This cable is also the substitute for unavailable 19133560 right side choke cable for more info
$13.11
Choke cable left V35s V50s V65s GU19134000
Part number:
Choke cable, left, V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, Lario.
$13.11
UFI oil filter, V35 V50 V50 II V50 III Monza V65C SP TT Lario
Part number:
UFI oil filter for all early small twin models: V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, Lario.
$16.30
Front 5 speed transmission gasket V35s V50s V65s V7s 887005
Part number:
GU19200320 GU23200370 Front transmission case gasket for 5 speed small twins, 1977 to 2015. V35s, V50, V50 II, V50 III, Monza, V65C, V65SP, Lario, more info
$9.29
gasket, rear small block 5 speed transmission V50 V65 V7 887006
Part number:
GU19201120 Gasket for the rear transmission cover on all 5 speed small twins 1977 to 2015. V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, more info
$5.60
Neutral switch V50 V65 750s V11s Californias CARC GU19207220
Part number:
gu19207200 Neutral indicator switch, V50, V50 II, V50 III, Monza, V65C, V65TT, V65SP, Lario, California Stone, Stone Touring, Special Sport, Metal, more info
$87.00
Drive shaft disc final drive coupling V50 V65 V7 V7II GU19327601
Part number:
Disk in drive shaft final drive coupling for complete small block series 1978 through 2016: all models: V35, V50, V50 II, V50 III, Monza, V65C, more info
$4.23
Universal joint complete V35 V50 V50 II GU19328001
Part number:
Universal joint assembly for V35, V50, V50 II This part is a Special Order item. Due to limited demand, we do not normally stock it. We will more info
$291.89
Universal joint, V50III, Monza special GU19328021
Part number:
19328020 This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$294.98
Universal joint, V65SP GU19328061
Part number:
This part is a Special Order item. Due to limited demand, we do not normally stock it. We will order the part directly from the more info
$297.84
Rear drive flange gasket small blocks GU19350700
Part number:
Rear drive flange gasket, 1977 to 2015 small twins V35, V50, V50 II, V50 III, Monza, V65C, V65SP, V65TT, Lario, Nevadas including Classic 750IE, more info
$0.74
Shim, 1.0, pinion gear (12355301 and 12355300) GU19355320
Part number:
Shim, 1.0, pinion gear, superseding 12355301 and 12355300 V700, V750 Special, Ambassador, 850GT, Eldorado, 850T, T3, T4, T5, V7 Sport, 750S, S3, more info
$16.73
Shim, 1.2, pinion gear (12355302) GU19355322
Part number:
Shim, 1.2, pinion gear superseding 12355302 V700, V750 Special, Ambassador, 850GT, Eldorado, 850T, T3, T4, T5, V7 Sport, 750S, S3, Convert, G5, 850 more info
$15.24
shim, 1.5, pinion gear (12355325)
Part number:
shim, 1.5, pinion gear, superseding 12355325 V700, V750 Special, Ambassador, 850GT, Eldorado, 850T, T3, T4, T5, V7 Sport, 750S, S3, Convert, G5, 850 more info
$15.42
Final drive sealing kit for small blocks V35 V50 V65 some Breva
Part number:
Best quality gasket, seals, crush washers, and orings kit to seal up a final drive box on any early small twin or small block including carbureted more info
$47.29
Final drive sealing kit for small twins V7 series 750cc
Part number:
Best quality gasket, seals, crush washers, and orings kit to seal up a final drive box on late model 750cc small blocks including V7 Classic, V7 more info
$102.10
