All Products
Oil cooler rubber mount, oil cooler brackets V11 Sport/LeMans
Part number:
GU91551132 Rubber anti-vibration grommet for oil cooler brackets on Daytona RS, Centauro, V11 Sport, V11 LeMans, Rosso Mandello, Nero Corsa, Scura, more info
$5.09
Woodruff key, models with Ducati alternator, 8V cam gear
Part number:
Woodruff key for models with crank mounted Ducati alternator, also camshaft timing gear 8 valve models. Approximate dimentions 12.4mm length, 4mm more info
$3.68
Crankshaft Woodruff key, most big twin to 2010 GU91702355
Part number:
Crankshaft Woodruff key, most big twins 1967 to 2010. V700, V750 Special 1969 to 1971, Ambassador, 850GT,Eldorado, V7 Sport, 750S , S3, 850T, more info
$7.55
Wheel bearing many models V11, also final drive bearing
Part number:
GU92201821 GU92201420 This bearing is used in various applications, most commonly in front or rear wheels, but also is the inner final drive (rear more info
$13.65
swingarm pivot bearing: V50 V65 V75 V7 Classic Breva750 V7 Racer
Part number:
Swingarm pivot bearing 6202-2RSH for small twin series 1977 to 2013: all versions V35, all versions V50, all versions V65, all versions V75 Nevada, more info
$9.12
Wheel bearing, Quota ES, V35-V65 front, V35-750 rear, Convert
Part number:
GU92204217 Wheel bearing on these models: Front wheel bearing on Quota and Quota 1100ES. Front wheel bearing on small blocks: V35, V35 II, more info
$12.45
Wheel bearing, V50 V65 V7s V7 IIs V7 IIIs 1100 Sport
Part number:
Wheel bearing used on rear wheel, right side (drive shaft side), on V35, V35 II, V50, V50 II, V50 III, V50 Monza, V65C, V65SP, V65TT, more info
$14.55
Wheel bearing many models - most commonly used wheel bearing
Part number:
Multiple model and use bearing. 20mm x 47mm x 14mm. Wheel bearing for most spoked disk brake big twin Guzzi wheels, models 750 -1000. Also rear more info
$9.45
Wheel bearing, many cast and spoked front wheels GU92204221
Part number:
Wheel bearing for original Moto Guzzi cast aluminum "mag" front wheels (not Boranni spoke wheels), and many of the late model small block spoke more info
$14.38
U Joint carrier bearing : V700 Ambassador Eldorado 850T
Part number:
Bearing for universal joints on early big twins with rear drum brakes: V700, Ambassador, 1969-1971 V750 Special, Eldorado, 850GT, V7 Sport, 750S, and more info
$23.42
U-Joint carrier bearing for most 1976-2002, also CARC GU92204230
Part number:
Carrier bearing for universal joints on most big twin disk rear brake models. This is the bearing that presses into the swingarm and supports the more info
$14.83
Wheel bearing, front wheel 1100 Sport V11 Sport V11 LeMans
Part number:
GU92205227 Wheel bearing 25mm x 52mm x 15mm, for front wheel, left side, V10 Centauro, 1100 Sport injected, V11 Sport 1999-2001, V11 more info
$12.49
Wheel bearing for V700 Ambassador Eldorado V7 Sport 750S
Part number:
Tapered roller bearing for front and rear wheels on V700, Ambassador, 1969-1971 V750 Special, and 2 shoe front brake Eldorado. Rear wheel more info
$53.88
Swingarm pivot bearing set (2 bearings), many big twins
Part number:
Swingarm pivot bearing set (2 bearings) for most big twins 1967 through 2010. Fits V700, Ambassador, 1969-1971 V750 Special, 850GT, Eldorado, more info
$38.16
Pair steering head bearings 1967 to 2010, V7s, pinion bearing
Part number:
GU92249225 Steering head bearing set, two tapered roller bearings as shown. Fitting Big Twin models 1967 to 2010, (excepting CARC models), more info
$27.86
Transmission bearing 5 speed big twin clutch and input shaft
Part number:
GU92256218 Transmission bearing, 5 speed and automatic big twins, fitting clutch shaft and input shaft on these models: 850GT, Eldorado, V7 more info
$54.04
Steel ball, speedometer drive 4 and 5 speed Big Twin GU92295702
Part number:
Steel ball speedometer drive on all 4 and 5 speed big Twin transmissions 1967 to 2011.V700, V750 Special 1969 to 1971,Ambassador, 850GT,Eldorado, V7 more info
$1.61
Steering head bearing kit with balls and races V50 V65
Part number:
Steering head bearing kit with balls and races for V50 and V65 series motorcycles including V50, V50 II, V50 III, Monza, V65SP and V65C. These more info
$126.41
Ball, brake microswitch
Part number:
This is the little steel ball that actuates the brake light switch when you pull in the brake lever on most rectangular reservoir Brembo master more info
$0.95
Cylindrical pin to retain 5th gear on main shaft
Part number:
Cylindrical pin that locks 5th gear onto the main shaft, Guzzi calls it "roller". Used on 5 speed big twins 1972-2011. 850GT, Eldorado, V7 Sport, more info
$5.83
common axle nut many models '70s, '80s, '90s
Part number:
GU92602316 Super common axle nut as used on many models of the '70s, '80s and '90s. This nut has an across the flats measure for a 24mm wrench, more info
$1.31
jam nut, valve adjuster, clutch arm adjuster
Part number:
This multi-function nut is an 8mm fine thread jam nut (M8 x 1.00) which is approximately half the thickness of a standard nut. It is an more info
$1.15
Jam nut, frame bolt M12 fine thread
Part number:
Fine thread M12 jam nut most commonly used on lower frame rail bolts, but also used on V7 Sport foot peg pivot bolts. Designed to be used in areas more info
$2.50
Axle nut, jam nut, M16 x 1.5, front axle many models
Part number:
Axle nut, jam nut, M16 x 1.5. This half thickness axle nut is common to many models. California 1100 1994-1997, T5, California II, Convert, G5, Mille more info
$2.68
Camshaft securing nut, big twins GU92602518
Part number:
Camshaft securing nut, 2 valve big twins, 1967-2001. V700, V750 Special 1969 to 1971,Ambassador, 850GT,Eldorado, V7 Sport, 750S , S3, 850T, 850T3, more info
$1.75
Crank nut, hex, Daytona, update for big twins with alternator
Part number:
Crank nut, hex, Daytona and later models. Preferred update for big twins with crank mounted alternator, starting with 1973 V7 Sport and later. Use more info
$54.39
Axle nut, V700, Ambassador, Eldorado
Part number:
Chrome plated axle nut for drum brake V700, Ambassador, 1969-1971 V750 Special, 850GT and Eldorado.
$14.83
lock nut, Eld/Amb/V700 swingarm pivot, chrome, each
Part number:
Lock nut for swingarm pivot pin, Eldorado, Ambassador, V700, 1969-1971 V7 Special, 850GT
$11.13
Connecting rod nut most 1972-1997 GU92731090
Part number:
Connecting rod nut as used on most big twins 1972 - 1997. Most Eldorado (earliest '72 bikes use 92750082), 850GT, V7 Sport, 750S, S3, 850T, more info
$3.96
Gasket, accelerator pump, PHF, PHM Dellorto 9278
Part number:
Gasket for the accelerator pump on all Dellorto PHF 30, 32, 34, 36, and PHM 38, 40 and 41 carburetors as used on Guzzi, Ducati, BMW, Laverda, Harley more info
$4.72
stainless steel acorn nut 8mm
Part number:
8mm acorn nut in shiny stainless steel. Nice trim item for any exposed 8mm threaded bolt. Great for starter bolts, bell housing bolts, luggage rack more info
$2.24
Rubber washer for rubber mounting, 6mm bolt GU93110060
Part number:
Rubber washer used for rubber mounting many different things, such as body panels, fairings, windshields, windscreens, fenders, coil mounts, more info
$1.90
Rubber plug fills hole in frame mirror mounts fenders GU93180080
Part number:
OEM rubber plug for 8mm holes, plugs hole in frame brace by side cover on Tonti frame models, also used for plugging un-used mirror mount more info
$5.87
Rubber plug for swingarm pivot cap, many models
Part number:
Rubber plug to cover the hole in the swing arm pivot cap. Used on many models since 1972. This rubber plug helps protects your swingarm more info
$1.49
Rubber plug, crash bar EV Jackal Bassa Stone Alum
Part number:
GU93180216 Rubber plug, crash bar California 1100 series crashbars, California EV, etc. This plug plugs the hole at the lower crash bar mount, hiding more info
$5.78
Rubber plug timing inspection flywheel view hole most all Guzzis
Part number:
GU93180220 Rubber plug for timing inspection hole, flywheel bell housing hole plug, transmission hole plug - for all Moto Guzzi models from 1972 to more info
$3.90
Rubber plug, oil fill plug, head bolt, etc GU93180245
Part number:
Rubber plug, for the head bolt on small blocks, also socket head transmission and rear drive fill plugs. Fitting the head bolts on small block V35, more info
$7.80
Rubber bumper for hinged cover over fuel tank cap GU93180706
Part number:
Rubber bumper for hinged cover over fuel tank cap. Used on late T3, T4, Convert, G5, 1000S, California II, 1000SP, LeMans II, LeMans III, CX100, more info
$2.09
Rubber fastener vibration damper for ECU or ignition module
Part number:
GU93221315 These little M4 rubber mount vibration dampers are used to provide vibration protection to the motorcycle' s computer or ignition more info
$8.13
Rubber anti-vibration mount, Californias V7 V7II V11 GU93222023
Part number:
Rubber isolator mount, silent block, used for mounting instrument consoles and dashes, coil packs, body panels, air boxes and even fuel tanks more info
$7.80
Rubber well nut M5 Guzzi body panels, fairings, side cover
Part number:
GU93231605 Rubber fastener, anti-vibration bush, expandable M5 well nut approx 14mm long. Commonly used on body panels, side covers, on fairing more info
$6.63
Rubber isolator well nut, body panels, frame rail covers
Part number:
GU93231606 Rubber isolator, expandable well nut, antivibration bush, primarily used to mount frame rail covers, on the V11 California more info
$2.05
Vibration damper, rubber mount, exhaust crossover spine frames
Part number:
Vibration damper, exhaust rubber mount for the exhaust crossovers used on Daytona 1000, 1100 Sport carb, 1100 Sport injected, Centauro, Daytona RS, more info
$13.02
Stand bumper V11 Sport / LeMans variants 2002-2005, Norge 06-08
Part number:
GU93242007 Sidestand bumper, 2002-2005 V11 Sport and V11 LeMans variants Ballabio, Cafe Sport and Coppa Italia , also Norge 2006-2008
$27.50
clamp, intake rubber, many models 1997-2016
Part number:
Clamp for intake rubber sleeve as used on many models 1997-2016. Range of clamp is 61mm to 65.5mm. Replaces item #15 in diagrams more info
$10.87
Small end universal boot clamp, intake sleeve clamp GU93306050
Part number:
Narrow width stainless steel hose clamp for the small end of the universal joint boot, also fits in place of 93305057 intake manifold sleeves for big more info
$5.73
Large stainless clamp for universal joint boot, rolled edges
Part number:
GU93306070 Large stainless steel hose clamp for universal joint boot on swingarm, fits the large side. Quality stainless steel clamp with more info
$9.83
Pilot, license plate bulb V7s V7 IIs V7 IIIs Norge Griso Stelvio
Part number:
GU93450105 Pilot bulb and license plate illumination, 5 Watt. Substitute numbers AP8224393 and 292022. Used in the headlight as a pilot or more info
$0.72
Pilot light bulb, daytime headlight, 12v/4w, speedo and tach
Part number:
GU93450119 Pilot light bulb, daytime headlight, most models 1999 and later. Also fitting speedometer or tach on several models. 12v ~4W, more info
$0.93
Bulb, indicator idiot lights, gauges, wedge base 3.8 watt
Part number:
GU93450120 17762105 Light bulb for various applications (illumination of indicator and some idiot lights, as well as speedometer and more info
$2.23
Bulb, 5w, license plate illumination, G5, Convert
Part number:
GU93450123 Bulb, 5w, license plate illumination fixture, V1000 G5 and Convert
$1.33
Turn signal bulb, 10W, most turn signals since 1986 GU93450127
Part number:
This is a clear 10 watt turn signal bulb that is used on most US version models since 1986. SP II, SP III, Strada, LeMans III, LeMans 1000 all years more info
$0.52
Idiot light bulb 12v2w for shaded style lamps 1100 Sport
Part number:
GU93450134 Indicator light bulb 12 volt 2 watt for shaded style idiot lights, as found on Daytona 1000, 1100 Sport carb, 1100 Sport more info
$1.32
Indicator light bulb, glass base, mini, push in, 12v 1.2W
Part number:
GU93450140 Indicator light bulb, idiot light bulb, wedge or spade type, glass base, miniature bulb for instrument consoles, 12v 1.2W, about 5mm more info
$3.78
Ring nut, transmission input shaft, 5 speeds GU93601022
Part number:
Ring nut, transmission input shaft, clutch hub, fits most big twin 5 speed transmissions 1972-2013, as well later 6 speed transmission on some CARC more info
$16.36
Ring nut for crankshaft, final drive, steering head, clutch hub
Part number:
GU93601026 4 pin ring nut used in multiple applications. Used on crankshafts with Bosch or Saprisa alternator taper, also rear drive pinion more info
$14.63
Loop frame steering head lock ring tool
Part number:
Loop frame steering head lock ring tool, V700, Ambassador, Eldorado, 1969-1971 V750 Special, 850GT. These tools are sold individually, however a pair more info
$22.29
Spring for u-joint/final drive
Part number:
Moto Guzzi Spring for u-joint/final drive MG Moto Guzzi 350 Nevada Club (347 ccm, 1998 - 1999)MG Moto Guzzi 350 V35/2 (346 ccm, 1980 - 1984)MG more info
$4.30
Clutch actuating arm spring, 1967-2019 GU94321105
Part number:
Clutch actuator lever arm spring, back of transmission on most Guzzi models excepting 6 speed V11 Sport and CARC series bikes: V700, V750 more info
$2.39
Rocker arm spindle spring 2 valve Big Twins 1967-2013 GU94322215
Part number:
Rocker arm shaft spring most 2 valve per cylinder twins: 1967-2013 V700, V750 Special 1969 to 1971, Ambassador,850GT, Eldorado, V7 Sport, 750S, more info
$23.07
Dellorto 9436 float needle and seat #200 PHF, PHBH GU19934600
Part number:
Dellorto float needle and seat size 200for PHBL, PHBH, and VHBZ. The 200 size was used on the small twins V35, V50, V65 and V75 models when equipped more info
$24.30
M6 fender washer inox various rubber mounts GU95000206
Part number:
Stainless steel fender washer for 6mmbolts, replacing original zinc item. Used on various rubber mounts, body panels, fenders, or anywherethat you more info
$1.25
M8 fender washer, stainless for various rubber mounts GU95000255
Part number:
M8 fender washer in stainless steel, for various rubber mounts, fuel tank mounts, anywhere you want to spread the load of the fastener across a wider more info
$1.40
M6 flat washer stainless GU95004206
Part number:
Stainless steel washer for 6mm bolts used in multiple applications over decades of Guzzis.
$0.69
M10 flat washer stainless GU95004210
Part number:
10mm stainless steel flat washer used in multiple applications, frame bolts, brake caliper bolts, many uses
$0.69
10mm split lock washer
Part number:
M10 stainless steel split type locking washer, multiple applications
$0.50
12mm flat washer stainless
Part number:
M12 flat washer stainless, substitute for 95000213 engine mounting bolt washer
$0.79
Brake pedal pivot washer Norge Stelvio Griso also engine mount
Part number:
GU95008310 Brake pedal pivot spacer CARC models, engine mounting washer on 1400s. Measures 10.5x22x2.5mm. Brake pedal pivot spacer on Nevada more info
$3.72
Star lock washer 6 speed V11 Sport LeMans series GU95028020
Part number:
Star lock washer 6 speed transmission on V11 Sport, V11 LeMans, Rosso Mandello, Nero Corsa, Scura, Tenni, V11 Cafe Sport, V11 Sport Naked, more info
$5.19
Star washer, input shaft 5 and some 6 speeds, 4 speed output
Part number:
GU95028022 Star washer, 5 and some 6 speed transmission input shaft, 4 speed transmission output shaft, 22x20x3.9. Five speed input shaft on more info
$3.74
Star washer for crankshaft ring nut, V11 Sport 6 speed input hub
Part number:
GU95028025 Star washer, Big Twin 750, 850, and 1000cc models using ring nut 93601026 on the front of the tapered crankshaft. As original on V7 more info
$5.52
Aluminum sealing washer 6mm fork drain, fuel inlet etc 6x10
Part number:
GU95100116 Aluminum crush washer with 6mm internal diameter for sealing 6mm bolts such as found on many fork drain plugs and carburetor fuel more info
$0.50
Brake caliper shim, 0.5mm GU95100332
Part number:
Brake caliper shim, 0.5mm thickness, 10mm ID for centering brake calipers over brake disks
$1.82
Brake caliper shim, 0.8mm GU95100333
Part number:
Brake caliper shim, 0.8mm thickness, 10mm ID for centering brake calipers over brake disks
$1.93
oil plug washer drain/fill engine, trans, final drive GU95100709
Part number:
This 20mm (ID) x 28 (OD) aluminum sealing washer is used in some capacity on nearly all Guzzis from 1967 until 2016. Notable exceptions to this are more info
$1.73
Crankshaft washer, 1993 Daytona 1000 and later with hex nut
Part number:
GU95100837 Crankshaft washer, originally used on 1993 Daytona 1000 but used on any alternator crankshaft noses when used with preferred update hex more info
$5.17
Axle washer, V700 Ambassador Eldorado V750 Specail 850GT
Part number:
Bright plated axle washer, used on the nut side of the front and rear axle of V700, Ambassador, 1969-1971 V750 Special, 850GT and Eldorado, including more info
$0.78
6mm stainless split lock washer
Part number:
M6 split stainless steel lock washer, multiple applications, generator cover or generator pulley on loop frame V700, Ambassador, Eldorado
$0.34
8mm split lock washer, stainless
Part number:
M8 stainless steel split type locking washer applies spring pressure and digs into fastener and base material for secure locking.
$0.43
Lock plate oil pickup screen most Guzzis 1975 to 2016 GU95187006
Part number:
Lock plate, oil pickup screen, most Small and Big Twin Guzzis from 1975 to 2016, excepting CARC models. Found on late 850T, 850T3, 850T4, V1000 more info
$5.72
Rear drive flange locking plate, fold over lock tab
Part number:
GU95187008 Fold over lock plate for many rear drive box flanges 1967 through 1997. Fold over locking plate (8 required on Big Twins, 7 on Small more info
$3.71
Brake rod adjustment barrel V700 Ambassador Eldorado V7 Sport T
Part number:
Rear drum brake rod adjustment barrel for Nuovo Falcone, V700, Ambassador, 1969-1971 V750 Special, Eldorado, 850GT, V7 Sport, 750S, 850T. This part more info
$6.68
Clevis pin, shift linkages etc 6x18 GU95770265
Part number:
Clevis pin, shift linkges etc., ~6mm x ~19mm. Superseding part number 95780265. Used on V700, Ambassador, Eldorado, V7 Sport, 750S, 850T, T3, T4, T5, more info
$11.18
Clutch arm pivot pin, GU95780271 2A000384
Part number:
Clutch arm pivot pin, at the rear of the transmission on all 4 and 5 speed transmissions from 1967 onwards, as well as 6 speed V7 II, V7 III more info
$46.38
Cable adjuster screw suitable for V700 Ambassador Eldorado
Part number:
Clutch and brake cable adjuster screw suitable for clutch and brake lever assemblies on V700, Ambassador, 1969-1971 V750 Special and 2 shoe front more info
$11.50
Dellorto 9596 needle circlip PHF and PHM carbs E-clip
Part number:
Dellorto number 9596 needle "E-clip" circlip for the K series slide needles on Guzzis equipped with PHF or PHM carbs. Also used on many other more info
$1.62
Drain plug, 10mm, transmission, final drive, engine,
Part number:
GU95980610 Oil drain plug, 10mm x 1.5 pitch, suitable for use on the transmission, final drive, engine, gearbox drain or level plugs on most more info
$22.69
Rubber drain hose from breather box to road
Part number:
Rubber drain hose from breather box to road, venting to atmosphere, originally used on V700, Ambassador, 1969-1971 V750 Special, Eldorado, 850GT, V7 more info
$17.80
Banjo bolt 8mm, oil delivery, valve cover vent GU95990037
Part number:
Banjo bolt 8mm, oil delivery and valve cover vent banjo fittings found on most all Big Twin Guzzi models from 1967 until 2010. Use 2 of crush washer more info
$4.20
bell housing stud, engine to transmission, long GU96508075
Part number:
Long bell housing stud, 8mm diameter, engine to transmission mounting. Fitting all big twin Guzzi models from 1967 to current 1400s. more info
$16.11
Spring for Neiman fork or steering locks
Part number:
Spring for steering lock cover for Neiman fork locks found on many Guzzi models. Also used on Ducatis.
$0.78
B064100 Clutch plate California 1400 Griso 1200 8v Stelvio Norge
Part number:
Original equipment AP clutch plate for Stelvio, Stelvio NTX, 2007-2017 Griso 1200 8V, 1200 Sport 8V 2008, Norge 1200 8V 2010-2016, California 1400 more info
$140.36
Base gasket Norge Breva 1100/1200 Griso Vintage 976064
Part number:
Base gasket Sport 1200, Breva 1200, Bellagio, early Norge, late Breva 1100, late Griso 1100, late Vintage. Please note these specific application more info
$14.80
Head gasket some Breva 1100, Griso 1100, Vintage 976087
Part number:
Head gasket, 2nd series, late Breva 1100, late Griso 1100, late Vintage. Please see specific application details below: Used on Breva 1100 starting more info
$33.12
Valve cover gasket metal Breva 11/12 Griso Vintage Norge 976139
Part number:
05023731, AP976139, 976139 Metal core valve cover gasket fitting these models: Breva 1100, Breva 1200, 1100 Griso 2 valve, California Vintage, more info
$7.72
