All Products
Exhaust gasket, Griso 8V Stelvio/NTX Cal1400 Audace 976376
Part number:
976376 Exhaust gasket seals the head pipe to the cylinder head on Griso 8V, Stelvio, Stelvio NTX, 1200 Sport 8V, California 1400, more info
$6.76
Left valve cover emblem, Stelvio, Griso 8V, 1200 Sport 8V
Part number:
Left valve cover emblem, Stelvio, Griso 8V, 1200 Sport 8V
$15.43
Right valve cover emblem, Stelvio, Griso 8V, 1200 Sport 8V
Part number:
Right valve cover emblem, Stelvio, Griso 8V, 1200 Sport 8V.
$15.43
Alternate mirror: Griso Breva Norge V7 Classic Stone Special
Part number:
978570 Low cost alternative to the original equipment mirror for Griso 1100, Griso 8V, Norge, Nevada Classic, 2nd series Breva 1100, more info
$24.26
Throttle cable, closing, Griso 1200 8V 978744
Part number:
Throttle cable closing or return to idle, Griso 1200 8V
$32.68
Oil pressure switch Griso 8V, Stelvio, 1200 Sport 8V
Part number:
Oil pressure switch Griso 1200 8V, Stelvio, 1200 Sport 8V
$16.48
Replacement tail light for fender eliminator
Part number:
Replacement tail light for fender eliminator kit 97894600X NOTE: This item is available by special-order. Please read store policies regarding more info
$43.24
Fender eliminator V7 Classic, V7 Stone, V7 Special, V7 II
Part number:
New version fender eliminator kit for V7, V7II, and V7III (see note below about Racer models). Not for V7 850 models. 3mm thick aluminum rear more info
$238.43
8mm hex head bolt M8x1.25 x 140mm
Part number:
M8 hex head bolt M8x1.25 x 140mm, EBC brake disk to Eldorado wide hub. These long bolts are suitable for custom dual disk installations only.
$5.89
M8 hex head bolt, springer solo seat forward mount
Part number:
M8 hex head bolt 180mm long. This bolt is a little longer than necessary, but it is suitable for sprung solo seat 12460541 if centered with extra more info
$9.05
centerstand pivot bolt, 50mm long
Part number:
Centerstand pivot bolt in stainless steel. This is the 5mm longer version commonly used on 1100cc California models but suitable for others.
$2.28
center stand pivot bolt, 55mm, used with mid-mount side stand
Part number:
Center stand pivot bolt, mid-mount side stand mounting bolt, LeMans 1000, 1000S
$1.88
Bolt M10 x 65mm SHCS
Part number:
10mm allen head bolt 65mm long : M10 x 65 x 1.25 SHCS (socket head cap screw)
$1.73
M6 hex head 14mm long rocker spindle retaining, round heads
Part number:
M6 x 14mm length hex head screw. Common uses are as the rocker arm spindle retaining fastener on round head motors 1967-1984, and to secure the more info
$1.13
6mm hex bolt, rocker arm, generator pulley, 98084316
Part number:
M6 hex head bolt M6 x16mm long x1.0, superseding part number 98084316, 8.8 zinc. Most common use is for securing the rocker arm spindle on square more info
$0.43
6mm bolt 16mm long, stainless steel
Part number:
Stainless steel M6 hex head bolt that is 16mm long.
$0.77
M6 hex head bolt stainless M6x1.0x20 HCS
Part number:
M6 hex head bolt stainless M6x1.0x20 HCS
$0.52
Ring gear to flywheel bolt, 20mm long, 1972-2002
Part number:
M8 x 20mm length zinc plated 8.8 harness bolt. Most common use is to attach the starter ring gear to the the flywheel on many models beginning in more info
$1.75
Ring gear to flywheel bolt, V700, Ambassador, Eldorado
Part number:
M8 x 25mm length zinc plated 8.8 hardness bolt. This 25mm long bolt is used to connect the starter ring gear to the flywheel on 1967-1975 more info
$2.00
8mm stainless steel hex bolt, 25mm long
Part number:
Stainless steel M8 hex head bolt M8x1.25x25 with multiple applications
$1.19
M10 hex bolt stainess, loop battery tray, brake stay rear drum
Part number:
M10 hex head bolt stainless, V700, Ambassador, Eldorado battery tray, rear brake stay, and passenger foot pegs. M10x1.5x20 HCS
$2.50
Lower triple clamp bolt: V700, Ambassdor, Eldorado
Part number:
This is the lower fork triple clamp pinch bolt of the correct length for bikes without windshield or turn signal mounts. This is a fine pitch, more info
$5.00
Brake lever for CARC models: Griso Breva Norge Stelvio
Part number:
981050 Aftermarket, adjustable reach hand brake lever for Griso 1100, Griso 1200 8V, Breva 1100, Breva 1200, all years Norge, Sport 1200, more info
$26.31
Stainless short valve cover bolt for V700 rocker box
Part number:
Bolt, V700 valve cover, short, stainless, hex head. Rocker box bolt short. 4 of these bolts are used on each V700 valve cover.
$2.65
Stainless long valve cover bolt for V700 rocker box
Part number:
Stainless steel long valve cover bolt for V700 valve covers. Rocker box bolt long. 4 of these bolts are used on each V700 valve cover.
$2.73
Fender mounting screw, cowling and body panel screw
Part number:
Big head body panel screw used on many models. Large flat head with socket drive, 6mm bolt, 22mm long. Fender mounting screw EV, 1100 Sport, more info
$12.59
Brake disc bolt kit, many models 1980s thru early 2000s
Part number:
Brake disk bolt kit contains 6 bolts fitting many models beginning middle 1980s and extending to early 2000s. These are 25mm long button head more info
$11.26
Big head screw, body panel attaching, CARC trans GU98370616
Part number:
Hex socket screw M6 x 16, black, commonly referred to as a big headed screw for attaching body panels such as side covers, battery covers, fairing more info
$3.42
Stainless steel fork drain screw, V7 Sport T3 G5 LeMans 1-3
Part number:
GU98620312 Stainless steel M6, allen head socket head fork drain plug screw. V7 Sport, 750S, S3, 850T, T3, G5, Convert, SP1000, more info
$0.98
6mm x 20 allen head stainless, rear drive sump Eld V7 Sport 850T
Part number:
M6 x 20mm allen head bolt, stainless. 6 required for rear drive oil sump on V7 Sport, 750S, 850T, 850GT, Eldorado and late Ambassador.
$0.66
M6x40 allen head bolt, stainless, rack, grab rail mount
Part number:
M6 allen head bolt, stainless, 40mm length. Amongst other uses, for fitting MG1691B luggage rack or 978951P seat grab rails to 2014 and later V7 more info
$1.34
socket head sump bolt 6mm x 60mm long, stainless
Part number:
60mm long, 6mm stainless steel bolt commonly used on oil pans on many models. Common on early big twin oil filter pans with sump spacers. M6 shcs 60mm
$2.77
M8x45mm allen bolt, stainless V7Sport instrument cluster etc
Part number:
M8x1.25x45mm length allen head bolt, stainless, V7Sport instrument cluster, etc
$1.67
fork pinch bolt, 10mm by 35mm long
Part number:
Stainless steel allen head bolt as used for fork triple clamp pinch bolts on many models from 1000S, 850 T, T3, Convert, G5, 1000SP, Mille GT, more info
$2.55
Lower frame bolt for big square crashbar T3 Convert G5
Part number:
Lower frame bolt for big square crashbar as used on 850 T3, V1000 Convert and V1000 G5. This bolt is 100mm long, 12mm shank diameter, with a more info
$8.46
12mm x 35mm frame bolt
Part number:
M12x1.25x35 frame bolt - common to early Tonti frame models for frame bolts or foot peg mounts. These bolts are black oxide plated and will more info
$6.02
12mm x 40mm frame bolt
Part number:
M12x40x1.25 SHCS frame bolt, black oxide, fine thread - common to early Tonti frame models for frame bolts or foot peg mounts. These bolts are more info
$2.39
12mm x 50mm frame bolt
Part number:
M12 x 1.25 x 50 SHCS frame bolt, black oxide - common to early Tonti frame models for frame bolts or foot peg mounts. These bolts are black oxide more info
$2.76
12mm x 70mm frame bolt, replaces 98621670
Part number:
M12x1.25x70 SHCS frame bolt - common to early Tonti frame models 850T, T3, 1000S, Mille GT, 850 T4, etc when using triangular crash bars 17450200 more info
$5.98
6mm x 30mm socket head stainless bolt for valve cover, alt cover
Part number:
M6x1.0x30mm length stainless steel allen head bolt common to valve covers, alternator covers, and many other applications GU98620330 more info
$1.45
M10x40 mm SHCS
Part number:
M10X40MM SHCS This item is available by special order. Please see store details regarding special order items and allow a typical extra 2 to 3 weeks more info
$5.92
genuine K&N air filter oil
Part number:
Genuine K&N air filter oil, aerosol, 12.25 oz, red tint, specially formulated for K&N gauze air filters. Made in USA. This item is not more info
$14.39
Centerstand pivot bolt, V700, Ambassador, Eldorado
Part number:
Centerstand pivot bolt for V700, Ambassador, V750 Special 850GT and Eldorado. The shoulder of this bolt is what the centerstand pivots on. These more info
$14.28
Double banjo bolt, 10mm x 1.00
Part number:
Double banjo bolt, 10mm x 1.00 fits into all Brembo brake components with 1.00 thread pitch, allows connection of 2 brake hoses to brake components. more info
$14.36
Goodridge double banjo bolt, 10 x 1.25
Part number:
Goodridge double banjo bolt, 10 x 1.25 with crush washers. Secures two brake hoses with banjo fittings to one component. Includes 3 copper sealing more info
$11.66
K&N Filter Care Kit, air filter cleaning and oiling solutions
Part number:
K&N Filter Care Service Kit contains 1 pump spray bottle of air filter cleaning solution, and 1 aerosol can of air filter oil. This item more info
$30.59
Agostini rear set foot peg kit, 850 LeMans, LM2, CX100
Part number:
Agostini rear set foot peg kit for 1976-1978 850 LeMans, LeMans II, and CX100. Agostini rear sets are black painted steel construction with knurled more info
$736.21
Agostini footpeg for Agostini rear set kits
Part number:
Replacement knurled aluminum foot rest for Agostini rear set foot peg kits. This item is available by special order only, please see our store more info
$27.93
Shift pedal Agostini rear set foot peg kit: 850 LeMans
Part number:
Agostini brake pedal for Agostini rear set foot rest kit for LeMans 850 1976-1978. This is a great spare or replacement item.
$96.60
K&N air filter for Norge1200, Breva1100, 1200 Sport
Part number:
K&N washable air filter for Norge 1200, Breva 1100, Sport 1200, Norge 850, Breva 850. This is a special order filter, not normally kept in stock, more info
$96.29
Air filter Breva 1100, Norge 1200
Part number:
Air filter: Breva 1100, Breva 1200, all years Norge 1200, Norge 850, 1200 Sport 8V 8104211 Also fitting Aprilia 2001 to 2003 RSV 1000 and 2002 to more info
$16.99
Air filter Breva 750 V7 Classic/Cafe V7 Racer to 2012 AP8104242
Part number:
Air filter for Breva 750, Nevada Classic 750IE, and 2007 through 2012 V7 Classic, V7 Cafe Classic, V7 Racer. This air filter fits all the early more info
$11.18
Air filter 2013 and up V7 Special Racer/Stone II III V7 850 V9
Part number:
AP8104924 Original UFI air filter for 2013 and newer Small Twin models: V7 Special, V7 Special II, V7 Racer, V7 Racer II, V7 Stone , V7 Stone more info
$19.11
K&N air filter 2013+ V7 Special Racer Stone V7 II III V7850 V9s
Part number:
Lifetime K&N air filter for 2013 and newer Small Block models: V7 Stone, V7 Racer, V7 Special, V7 Racer II, V7 Special II, V7 Stone II, V7 more info
$78.29
Clutch lever for Griso, Norge, Breva 1100, Stelvio, Sport 1200
Part number:
Adjustable polished aluminum replacement clutch lever for Griso 1100, Griso 8V, Norge until 2008, Breva 1100, Breva 1200, all Stelvio 2008-2017, more info
$34.99
Brake and shift rubber '10 and later V7s IIs IIIs V9 V85TT CARC
Part number:
Rear brake and shift pedal toe rubber for Stelvio, Stelvio NTX, all Norge, Breva 1100, Breva 1200, Sport 1200, 1200 Sport 8V, MGS01, Griso more info
$3.57
Inner side stand spring for many Guzzi/Aprilia
Part number:
Fitment: Aprilia Aprilia 1000 ETV Capo Nord , BJ 2001 - 2005 Aprilia 1000 RSV , BJ 1998 - 2000 Aprilia 1000 RSV , BJ 2001 - 2002 Aprilia 1000 RSV , more info
$8.28
Pair of fork seals Griso 850, 1100, 1200 8V all with Showa fork
Part number:
Pair (2 seals) of genuine Italian fork seals for all Griso models with Showa forks: Griso 850, Griso 1100, and Griso 1200 8V. This is a pair of more info
$14.02
Ohlins fork seals kit for Ohlins equipped V11 series
Part number:
AP8123975 Genuine Ohlins fork seal kit for Ohlins road and track 43mm forks found on V11 Cafe Sport, Coppa Italia, Nero Corsa, Rosso Corsa, and more info
$79.95
air temperature sensor
Part number:
Air temperature sensor as used on the following models: Moto Guzzi 1000 Daytona RS 1997 - 2000 Moto Guzzi 1100 Breva 2005 - 2007 Moto Guzzi 1100 more info
$101.84
All Balls front wheel bearing kit: Griso Stelvio Breva Norge
Part number:
All Balls wheel bearings and seals kit for front wheel on all Griso, Breva 1100, Breva 1200, Sport 1200, all Stelvio, all Norge. Tapered steering more info
$23.69
OEM Aprilia Washer D10,5x16x1
Part number:
OEM Aprilial Washer This item is available by special order. Please see store policies regarding special order items and allow a extra typical 2 to 4 more info
$9.64
OEM Aprilia body panel screw
Part number:
OEM Aprilia body panel socket head flange bolt commonly used on fenders - M5 x 12mm
$7.00
Pair of fork seals Stelvio pre 2011 (not NTX) 50mm Marzocchi
Part number:
AP8163070 Pair of fork seals for Stelvio models with 50mm Marzocchi forks, first series bikes pre 2011, not NTX. Updates previous part number more info
$52.32
Outer side stand spring for many Guzzi/Aprilia
Part number:
Aprilia Aprilia 1000 RST Mille Futura , BJ 2001 - 2004 Aprilia 1000 RSV , BJ 1998 - 2000 Aprilia 1000 RSV , BJ 2001 - 2002 Aprilia 1000 RSV , BJ 2003 more info
$11.35
Starter relay Norge, Griso, Stelvio, V7s V7IIs IIIs V9s V85TT
Part number:
AP8224462 Starter relay as used on all Norge, Griso 1100, Griso 1200 8V, Stelvio, Stelvio NTX, Breva 1100, Sport 1200, 1200 Sport more info
$18.81
Transmission oil filter screen V7 II, V7 III, V9 models
Part number:
Transmission oil filter screen for V7 II, V7 III, and V9 models. Comes complete as shown with the oring. V7 Stone II V7 Special II V7 Stornello II more info
$5.42
Right front blinker California 1400 Touring, Custom, Eldorado
Part number:
Right hand front turn signal for California 1400 Touring, California 1400 Custom, and 1400 Eldorado.
$106.54
Left front blinker California 1400 Touring, Custom, Eldorado
Part number:
Left hand front turn signal for California 1400 Touring, California 1400 Custom, and 1400 Eldorado.
$64.90
trim washer, shock absorber mount, V7 III series, V9, 1400 Calif
Part number:
Special beveled edge trim washer commonly used on shock absorber mounts on V7 III series, V9 series, and 1400 Eldorado, California 1400 Custom, and more info
$20.03
Clutch cable V7 Stone 2013-2015, V7 Special 2013-2015
Part number:
Clutch cable V7 Stone 2013-2015, V7 Special 2013-2015. Note: this cable replaces 883941
$33.28
OEM oil filter California 1400 series '15-16 Griso 2A000668
Part number:
B063428 OEM oil filter for Moto Guzzi California 1400 models, and 2015-2016 Griso 1200 8V. Also sold under part number 2A000668. Fits: more info
$24.95
engine sump gasket California 1400 series, Griso 1200 8V
Part number:
Oil pan gasket for the complete 1400cc California series: MG-X21, California 1400, Audace, 1400 Eldorado, California 1400 Touring, and Griso more info
$25.76
Ikon Basix shock absorbers, Eldorado V7 Sport 850 LeMans SP1000
Part number:
New Ikon Basix series shock absorbers offer the proven quality and engineering of Ikon products, but in a lower priced package. This version is more info
$347.65
Ikon Basix shock absorbers set, Ducati 250/350/450/500LD/SL/600T
Part number:
New Ikon Basix series shock absorbers offer the proven quality and engineering of Ikon products, but in a lower priced package. IkonBasix more info
$347.65
Ikon Basix shock absorbers set, LeMans III, LeMans 1000, SPIII
Part number:
New Ikon Basix series shock absorbers offer the proven quality and engineering of Ikon products, but in a lower priced package. This version more info
$294.62
Ikon Basix shock absorber set, Cal2 Cal3 Cal1100 EV Jackal Stone
Part number:
New Ikon Basix series shock absorbers offer the proven quality and engineering of Ikon products, but in a lower priced package. This version more info
$301.06
Bottom end gasket/seal/oring kit Ambassador Eldorado 850GT
Part number:
Engine bottom end gasket, seal and o ring kit for Ambassador, 1969 to 1971 V750 Special, Eldorado and 850GT. Includes updated Viton front and rear more info
$94.94
Bottom end gasket/seal/oring kit V7 Sport 750S early 850T
Part number:
Engine bottom end gasket, seal and o ring kit for V7 Sport, 750S and 850T models without an oil filter. Includes updated front seal, Viton rear more info
$57.09
Bottom end gasket/seal/oring kit 850's 1000's with oil filter
Part number:
Engine bottom end gasket, seal and o ring kit for 1975 to 1987 Big Twin Guzzi models with an oil filter and a Bosch alternator. Models include more info
$64.70
brake light switch, banjo bolt M10 x 1.00
Part number:
Goodridge brake light switch, banjo bolt 1.00 pitch thread, single, with wires is a substitute for the original 14657050 switch. This brake switch more info
$19.76
brake light switch banjo bolt type 10mm x 1.25
Part number:
Goodridge hydraulic brake light switch. This switch is a single banjo bolt type, meaning it replaces a standard banjo bolt and attaches one brake more info
$19.76
Goodridge brake light switch double banjo bolt 1.00
Part number:
Goodridge brake light switch, double banjo bolt 1.00 pitch thread
$28.76
brake light switch, double banjo bolt 10mm x 1.25
Part number:
Brake light switch that is a double banjo bolt with a 10mm x 1.25 thread pitch. Some Guzzi brake components (such as early junction blocks sometimes more info
$28.76
On Sale
Original type windshield V7 series 1967-1975
Part number:
CLEARANCE PIECE: Scratches on the top right corner (when sitting on the bike) mean a heavily discounted price. There are no returns on this clearance more info
$161.20 $80.60
Save: 50%
Save: 50%
Brembo 30/34 caliper pistons seals kit
Part number:
Brembo pistons and seals for 30/34 brake calipers. No dust seals.
$30.21
NGK BPR6ES spark plug 1100 Calis V11 Sports Griso Stelvio
Part number:
NGK BPR6ES spark plug, 1100cc California models, California 1100, EV, EV Touring, Jackal, Bassa, California Special, California Stone, Stone Touring, more info
$4.46
NGK BPR7ES spark plug V7 Sport, LeMans I/II/III/IV/V V50s
Part number:
NGK BPR7ES spark plug is the official replacement spark plug for BP7ES which has been discontinued. BP7ES was originally specified for the more info
$4.46
Mistral muffler bracket as spare part
Part number:
Bracket for Mistral mufflers (sold each). Please specify which bike and specific exhaust you have for ordering. NOTE: This item is sold as a more info
$19.47
NGK BR8ES spark plug, 750 Breva Nevada V7 Classic Cafe Racer
Part number:
NGK BR8ES spark plug, V7 750 series models 2008-2012 including V7 Classic, V7 Stone, V7 Special, V7 Racer, Breva 750, Nevada Classic 750IE, 2004-2005 more info
$4.46
MISTRAL V7850 CENTER STAND BRACKET (LONG BLACK PAINT)
Part number:
This is the optional bracket (in black finish) needed to use the long Mistral mufflers while using the OEM Guzzi center stand on your V7 850. NOTE: more info
$44.96
MISTRAL V7850 CENTER STAND BRACKET (LONG SATIN)
Part number:
This is the optional bracket needed to use the long Mistral mufflers while using the OEM Guzzi center stand on your V7 850. NOTE: This bracket is more info
$44.96
MISTRAL V7850 CENTER STAND BRACKET (SHORT BLACK PAINT)
Part number:
This is the optional bracket (in black finish) needed to use the Mistral short mufflers while using the OEM Guzzi center stand on your V7 850.
$44.96
MISTRAL V7850 CENTER STAND BRACKET (SHORT SATIN)
Part number:
This is the optional bracket needed to use the Mistral short mufflers while using the OEM Guzzi center stand on your V7 850.
$44.96
Mistral Center Stand Bumper Bracket for V7III Short mufflers
Part number:
Mistral satin/matte finish muffler bracket with center stand stop bumper to enable OEM Guzzi center stand use on V7III models equipped with Mistral more info
$44.96
Black Mistral Center Stand Bracket for V7III Short mufflers
Part number:
Mistral muffler bracket (black) with center stand stop bumper to enable OEM Guzzi center stand use on V7III models equipped with Mistral Short more info
$44.96
MISTRAL V7850 CENTER STAND BRACKET (SHORT ICE GREY)
Part number:
This is the optional bracket needed to use the Mistral short mufflers while using the OEM Guzzi center stand on your V7 850.
$44.96
