New Products

This multi-function nut is an 8mm fine thread jam nut (M8 x 1.00) which is approximately half the thickness of a standard nut.  It is an...

Genuine Mistral replacement "db killer"  for Mistral MGSHORT mufflers for V7 and V7 II 750cc series.   This item fits a 38mm exhaust exit...

One Mistral "db killer" for MG10021CC  Note: This item is not normally kept in stock but available by special order.  Please read store...

These are a modern day take-off on the Italian "Verlicchi" adjustable clip on handlebar from the 70s. This is the "touring" height bar, with about a...

GU05530536  This o-ring is for the fork top bolt/plug on the following models: Moto Guzzi 1100 Breva 2005 - 2007 Moto Guzzi 1100 Breva ABS 2005...

Alternate Brembo 13mm master cylinder for California models with the large diameter "fat" handlebars. This is a replacement for the discontinued...

You get both optimal air filtration and high air flow from this K&N air filter element.  Designed and manufactured to be a perfect...

Rubber o-ring for fuel level sensor on the following Ducati models: Ducati 600 SS `95/97 Ducati 620 i.e `01 Ducati 748 `99 Ducati 748 `99 SPS Ducati...

Moto Guzzi accessory luggage rack bag for V11  Note this item is available only by special order, please read store policies regarding special...

chain slider, Ducati Paso 750, 906, 907  Ducati 750 Paso 1984 - 1992 Ducati 906 Paso `88 Ducati 907 I.E. `92 

You get both optimal air filtration and high air flow from these HiFlo air filter elements.  Designed and manufactured to be a perfect...

Nut for the steering head stem on many early Tonti frame and small twins.  This piece tensions the steering head bearings and provides the...

Screw for CEV semi-round, flat sided tail light lens 14741701.  Diameter of threaded section is ~3.9mm, overall length is ~74.66mm, and the head...

Speedometer cable for 500 Nuovo Falcone.  ~90cm sheath, ~93cm inner Note: stock photo may not match actual item

Mistral DB Killer for MG1108 with exit diameter approximately 48mm. Notes: Stock photo may not reflect actual item. This item is not normally...

Cast aluminum spacer for the alternator cover on the models listed below.  This aluminum piece replaces the original plastic item  permits...

Mistral black painted stainless steel slip-on muffler set for  Triumph Thunderbird Sport 900, 2003-2004.  Note the photo shows the polished...

OEM accessory folding mirror for V85TT.  Mirror fits both left and right side and is suitable for all V85TT versions.  

Aftermarket timing and RPM sensor suitable for many Ducati models 1999 to 2010. One bolt mounting, 3 wire plug.   620 IE 2001 748 SPS 1999 748 R...

Internal fuel filter for Stelvio NTX 2013 and later. This item is not normally kept in stock and is a special order item.  Please read store...

German Spiegler front brake hose kit for custom applications using non-standard and dis-integrated brake system.  This kit connects 2 brake...

Mistral head pipe set with crossover and flanges for LeMans 850, LeMans II and CX100. Polished stainless steel with CNC aluminum flanges. These are...

Brembo master cylinder repair kit for 11mm rear PS11A master cylinders as found on the models shown below.  Piston diameter ~11mm, piston...

Speedometer cable update kit eliminates the fragile 60 degree angle drive gears on early V11 Sport and V11 LeMans models.  Simply remove your...

Oil pan sump extender for early small block models shown below.   Approximately 1.5 inch  thick aluminum spacer increases the oil capacity...

Bolt kit for the deep oil pan sump extender conversion Breva 750, V7 Classic and V7 Cafe

Longer stainless steel bolt kit for sump extender on the following models:  Moto Guzzi 350 V35 1977 - 1979 Moto Guzzi 350 V35 C 1982 - 1987 Moto...

Choke cable for 850 LeMans, LeMans II, and 850 LeMans III. This cable is the short side and replaces 14133550.    

IKON aluminum alloy shock absorbers for1000S, 850 LeMans III, LeMans 1000 1985-1993, 1000 SPII, 1000 SPIII, Mille GT, Strada, and the V65C....

Mistral short conical muffler set for 850T, 850T3, G5.  Classic reverse cone appearance, lightweight stainless steel, and all the great Guzzi...

Screw that retains the choke housing on PHM carbs. Three used per carb. Special order part, not normally stocked. Please see our store policies page...

Dellorto 8887 choke/enrichener assembly housing for PHM carbs as used on Guzzi, Ducati, Harley Davidson and other brand motorcycles. Special order...

Dellorto 8888 gasket for the choke/enrichener assembly on PHM carbs. As used on Guzzis, Ducatis, Harley Davidson and other brand motorcycles. Special...

MOTUL Gear Competition hypoid gear oil 75W140.  100% full synthetic racing lubricant based on ester techology. 1 liter bottle with convenient...

Custom laser cut aluminum alloy battery tray. Thick aluminum trayprovides a stronger connection between your engine/transmission unit and the...