sealing washers
16mm ID sealing washer with rubber seal many models 1999 on
Part number: 01154230
GU01154230 16mm sealing washer with rubber seal, many models since 2001. Used on oil cooler connections, oil breather return hose connections,... more info
$0.36
10mm sealing washer with rubber ring 1999 onward GU01528930
Part number: 01528930
10mm ID sealing washer with rubber seal, original on many models since 1999. Engine oil drain plug crush washer on Breva 750, Nevada... more info
$1.17
16mm ID crush washer oil line/breather hose fittings GU10154200
Part number: 10154200
Aluminum crush washer, 22mm OD and 16mm ID. Used on various oil breather and oil cooler plumbing fittings as well as engine drain plugs on several... more info
$1.90
10mm alu sealing washer for overflow and drain plugs
Part number: 10528900
10mm internal diameter aluminum sealing washer with large 17mm outer diameter commonly used for 10mm oil drain plugs as used on engines,... more info
$1.04
Aluminum seal washer, 12mm ID GU12006400
Part number: 12006400
Aluminum sealing washer, 12mm internal diameter, for oil breather return pipe to sump on early big blocks, fuel filter banjo fitting on many injected... more info
$0.58
8mm alu washer Oil lines Oil filter access cover GU12154200
Part number: 12154200
Internal diameter is 8mm on this aluminum sealing washer. These 8mm crush washers can be found somewhere on most every Guzzi model. Most... more info
$0.46
8mm seal washer with rubber center sub for GU12154200
Part number: 12154201
8mm internal diameter steel sealing washer with rubber center, an alternative to the aluminum crush washer 12154200. Most commonly used on round head... more info
$0.34
Fiber 6mm sealing washer, fork drain, carb inlet, synch plug
Part number: 13934700
Fiber 6mm sealing washer commonly used on fork drain plugs, carburetor inlets, intake manifold synchronizing plugs, and anywhere else a small 6mm... more info
$0.52
18mm sealing washer CARC models Convert lambda plugs GU18144350
Part number: 18144350
~18mm crush washer or sealing washer used in many applications including: side fill plug on 6 speed transmission on CARC models, unused lambda plug... more info
$8.25
14.5mm ID crush washerV7 series, Convert, V11 fuel filter nipple
Part number: 18161150
GU18161150 Aluminum sealing washer or crush washer with 14.45mm ID, many uses: Automatic transmission hose fitting used on Convert and California II... more info
$3.45
10mm aluminum seal washer, brake and oil lines, fork bottom bolt
Part number: 25656102
GU25656102 This is a much better than average quality aluminum crush washer, nearly 1.5mm thick for positive sealing. 10mm internal diameter... more info
$1.09
20mm fiber washer for fill, drain plugs PHM/PHF bowl nut gasket
Part number: 90714195
20mm ID fiber sealing washer common to many uses. Typically 20mm engine oil drain plugs, engine, rear drive and transmission fill plugs. Original... more info
$1.66
Sealing washer CARC level plug, copper, thin wall 12mm
Part number: 90718120
Sealing washer for CARC level plug, copper, thin wall 12mm. This crush washer fits all models with CARC final drive: Breva 1100, Sport 1200, Griso,... more info
$1.84
Aluminum sealing washer 6mm fork drain, fuel inlet etc 6x10
Part number: 95100116
GU95100116 Aluminum crush washer with 6mm internal diameter for sealing 6mm bolts such as found on many fork drain plugs and carburetor fuel... more info
$0.50
oil plug washer drain/fill engine, trans, final drive GU95100709
Part number: 95100709
This 20mm (ID) x 28 (OD) aluminum sealing washer is used in some capacity on nearly all Guzzis from 1967 until 2016. Notable exceptions to this are... more info
$1.38
