orings

Product Image Product Price
Viton distributor o ring Eld,Amb,V700

Viton distributor o ring Eldorado, Ambassador, V700, V750 Special, 850GT. This oring seals the distributor to the engine block, in conjuntion with a ... more info

Part Number: 12715434

Cylinder stud oring, all Guzzi small twins V35 V50 V65 V7 V9

Oring, for upper cylinder stud, between bottom of cylinder and base gasket. All Guzzi 350, 500, 650, 750 and V9 models. V35, V50, V50 II, V50 III, ... more info

Part Number: 61027200

viton oring for 36mm plastic manifolds motor side, black

viton oring for 36mm plastic manifolds motor side, black

Part Number: 90704215

viton oring for 36mm plastic manifolds, green for carb side

viton oring for 36mm plastic manifolds, green for carb side

Part Number: 90704418

oil hose oring, green viton, return to rear pan and oil cooler

oil cooler hose oring, green viton, used in two places: return hose to rear of oil pan, and oil cooler to front of oil pan on V11 Sport and V11 LeMans

Part Number: 90706010

cylinder stud o-ring, Viton, 12 per engine, 90706090

Viton cylinder stud o-ring, 12 used per engine. Substitute number 90706090

Part Number: 90706094

oring for fuel tank pressure regulator fitting

oring for fuel tank pressure regulator fitting. V10 Centauro, V11 Sport 1999-2001, Quota ES, V11 LeMans Naked 2001-2002, also used for petcock flange ... more info

Part Number: 90706116

V700 cylinder nut oring, 12 o'clock cylinder plug

This o-ring seals the unique top (12 o'clock) cylinder stud nut used on the V700.

Part Number: 90706119

O ring shift lever Bassa, Jackal, California Special

O-ring for foot shift lever on V11 California Special 2000, 1999 Bassa, 1999-2001 Jackal.

Part Number: 90706135

shift shaft oring 5 speeds, thermostat union oring V11Sport-LM

shift shaft oring for 5 speeds, also used as the thermostat union oring on V11 Sport and LeMans

Part Number: 90706140

o-ring phase sensor, revolution sensor, cam sensor, 847180

o-ring phase sensor, revolution sensor, cam sensor oring for fuel injected models 1994-20XX. This oring updates to part number 847180

Part Number: 90706141

V700 and early Ambassador 20mm clutch outer body plunger oring

V700 and early Ambassador 20mm clutch outer body plunger oring. This is the oring that seals the early smaller (20mm) clutch push rod actuator ... more info

Part Number: 90706150

oring Convert transmission

oring Convert transmission

Part Number: 90706158

clutch outer body plunger throwout oring Most all Guzzis

This o-ring seals the clutch outer body (clutch plunger or actuator) to the rear transmission cover, on almost all Guzzi models. Fits the 22mm outer ... more info

Part Number: 90706170

oring, Convert tranmission 500 650 750 small twin rear drive etc

Oring used in 1000 Convert and California II Automatic transmissions. Used on the pinion shaft of all 350cc, 500cc, 650cc and 750cc small twin rear ... more info

Part Number: 90706188

Oring, trans output shaft - cylinder stud access plug, trans hub

This oring is used in multiple places: Transmission output shaft between 1st and 5th gear on Big Twin 750cc, 850cc, 1000cc and 1100cc 5 speed ... more info

Part Number: 90706203

o ring transmission layshaft between 5th gear and bearing (old)

This oring used in 5 speed transmissions on the layshaft between 5th gear and bearing, or against shim 28217350 and the bearing.

Part Number: 90706219

o ring top fork plug V700 Ambassador Eldorado Convert trans

This oring fits nicely into the top fork plug on V700, V750 Special, Ambassador, 850GT and front drum brake Eldorado . It is also used on the layshft ... more info

Part Number: 90706222

transmission input hub oring (clutch hub)

Oring for transmission input gear (clutch hub), on Big Twin 750cc, 850cc, 1000cc and 1100cc 5 speed transmissions. This o-ring fits in the chamfered ... more info

Part Number: 90706235

oring, fork top bolt, V7 Sport on up, 35mm forks

This oring is for the fork top bolt on early Tonti frame models with 35mm forks, which is mostly V7 Sport in 1972 until 1986 on the Cal2, and most ... more info

Part Number: 90706238

crankshaft oring, V700-Amb-Eld

crankshaft oring for all loop frame models V700 Ambassador Eldorado. This oring in not included in the oring kit for these models and must be ordered ... more info

Part Number: 90706250

oring, LM1000 Cal3 lower fork internal, small block cylinder

oring, one of two orings used in LM1000, California III, lower fork internal, also V50 V65 small block cylinder

Part Number: 90706252

o-ring LM1000 Cal3 Daytona fork lower, one of two orings used

o-ring, fork lower, one of two orings used in LM1000, California III, and early Daytona

Part Number: 90706253

Oring for distributor blanking cover, early fuel injected models

This oring seals the blanking cover over the distributor hole on early fuel injected models and models without camshaft driven distributors. 1993 ... more info

Part Number: 90706313

breather fitting oring, Griso Stelvio Breva 1100, Norge, 1200 Sp

breather fitting oring on front engine cover, described in the parts book as gasket, Griso 1100 2005-2008, Griso 1200 8V 2007-2011, Stelvio 1200, ... more info

Part Number: 90706347

oring spark plug hole, 4-valve valve cover

oring for the spark plug hole in the valve cover on early 4-valve models Daytona, Centauro, MGS-01

Part Number: 90706361

oring, Convert, ATF pump body to timing cover

oring, Convert, seals the ATF pump body to the inside of the timing cover.

Part Number: 90706409

Oil filter access cover o ring small twin V50 V65 V7 V7 II V9

O-ring for the oil filter access cover on V 35, V50, V65, V7, V7 II, and V9 small twins. This is the oring to seal the removable cover that allows ... more info

Part Number: 90706444

oring Convert trans, behind input shaft

oring Convert trans, behind input shaft

Part Number: 90706473

o-ring V7-Amb-Eld forks, drum rear drive pinion carrier flange

This oring does double duty as the fork collar oring on V700 Ambassador and drum brake Eldorado forks, and also is the oring for the pinion gear ... more info

Part Number: 90706490

oring, intake manifold flange Daytona, RS, Centauro,

oring, intake manifold flange Daytona, RS, Centauro, also used in V50 V65 small twin air box, and small twin rear drive pinion carrier to drive box ... more info

Part Number: 90706552

rear drive pinion carrier o-ring disk

This oring is used one on each side of the rear drive pinion carrier on many Big Twin models with rear disk brakes, from 1975 thru 2010. 850T3, 1000 ... more info

Part Number: 90706584

oring Convert transmission

oring Convert transmission

Part Number: 90706600

Pinion o ring, V11 Sport and variants

Pinion o ring, V11 Sport and variants

Part Number: 90706616

oil filter cover o ring, Cent, V11 Sport, speedo oring V700 etc

double duty oring, seals the oil filter access cover on broad sump models Centauro Daytona V11 Sport V11 LeMans, and also fits the 100mm speedometers ... more info

Part Number: 90706948

Rear drive flange sealing o-ring V11 sport and variants

Rear drive flange sealing oring V11 Sport, V11 LeMans, and all variants

Part Number: 90706958