IKON fork spring set V11 California models 1998-2013

  • Part Number: 500009
  • Manufactured by: IKON
MG Cycle 92.76
$92.76

In stock IN STOCK

Quantity:
+
-

Ikon brand progressively wound fork springs. These fork springs are an upgrade replacement for all V11 California models 1998-2013 which includes California EV, Jackal, Stone, Bassa, California Special, and California Vintage. Ikon fork springs allow full suspension travel and work to alleviate excessive sag and nose dive while contributing to improved stability, ride control and comfort. Progressively wound springs have altered coil spacing to provide both a smooth ride and progressively firmer response to larger road irregularities and loads. Tighter coils respond to minor inputs providing soft initial fork travel, wider spaced coils offer greater resistance as tighter coils are fully compressed. Note: the V11 California series used the same basic Marzocchi forks throughout the model range, but some models have different internals that allow damping adjustments, and others do not. To account for this, some models use long springs with short preload spacers, and other models use short springs with long preload spacers. These Ikon springs are "relatively short" at approximately 283mm (~11.125") and are suitable for use in both fork versions. To account for differing fork internals, you must provide an appropriate length preload spacer (commonly PVC pipe) to maintain your original ride height. Depending on your skill set, you may need to seek professional assistance for installation. A short installation guide is included.

Ikon brand progressively wound fork springs. These fork springs are an upgrade replacement for all V11 California models 1998-2013 which includes California EV, Jackal, Stone, Bassa, California Special, and California Vintage. Ikon fork springs allow full suspension travel and work to alleviate excessive sag and nose dive while contributing to improved stability, ride control and comfort. Progressively wound springs have altered coil spacing to provide both a smooth ride and progressively firmer response to larger road irregularities and loads. Tighter coils respond to minor inputs providing soft initial fork travel, wider spaced coils offer greater resistance as tighter coils are fully compressed. Note: the V11 California series used the same basic Marzocchi forks throughout the model range, but some models have different internals that allow damping adjustments, and others do not. To account for this, some models use long springs with short preload spacers, and other models use short springs with long preload spacers. These Ikon springs are "relatively short" at approximately 283mm (~11.125") and are suitable for use in both fork versions. To account for differing fork internals, you must provide an appropriate length preload spacer (commonly PVC pipe) to maintain your original ride height. Depending on your skill set, you may need to seek professional assistance for installation. A short installation guide is included.