Ignition switch, 3 wire, 2 position, Ducati bevel heads

  • Part Number: 068738320
  • Manufactured by: Moto Guzzi
MG Cycle 34.00
$34.00

In stock IN STOCK

Quantity:
+
-

This universal ignition switch has 2 positions: On and Off.  There are three male spade connectors on the back labelled 30, 30, and 15.54.  Chrome plated steel knurled ring nut.  2 rubber covered keys.  These simple universal switches fit standard 22mm holes with the 180 degree locking slot engagement to prevent the switch from rotating in the hole when you turn the key.  Total length ~46mm, length without the terminals ~36mm, largest diameter ~29.5mm.

A 2 position ignition switch provides on and off positions only, which means there is no key position that turns the tail light on while allowing the key to be removed.  

Great replacement switch for Ducati bevel heads such as 750SS, replaces part number 09006.  

 

This universal ignition switch has 2 positions: On and Off.  There are three male spade connectors on the back labelled 30, 30, and 15.54.  Chrome plated steel knurled ring nut.  2 rubber covered keys.  These simple universal switches fit standard 22mm holes with the 180 degree locking slot engagement to prevent the switch from rotating in the hole when you turn the key.  Total length ~46mm, length without the terminals ~36mm, largest diameter ~29.5mm.A 2 position ignition switch provides on and off positions only, which means there is no key position that turns the tail light on while allowing the key to be removed.  Great replacement switch for Ducati bevel heads such as 750SS, replaces part number 09006.