ROX Elite 1-1/8 inch (28mm) pivoting handlebar riser, 2" rise

  • Part Number: 06020437
  • Manufactured by: Moto Guzzi
MG Cycle 75.20
$75.20

Currently sold out CURRENTLY SOLD OUT, OR SPECIAL ORDER ITEM (SEE BELOW)
Order now, and this item will ship to you when new stock arrives

Quantity:
+
-

Risers accept all 1 1/8 inch handlebars. Permits handlbars to be placed closer to the rider to reduce the reach on V11 Coppa Italia, V11 Cafe Sport, V11 Scura R, and V11 Sport Ballabio, and Griso with 1-1/8 inch handlebars. 

28mm (1 1/8 inch) ROX Elite pivoting handlebar riser, 2" rise. Aluminum risers clamp into 1-1/8 inch handlebar clamps and permit raising or moving the handlebar forward or toward the rider by 2 inches. Please note that longer control cables, brake hoses, and/or wires maybe required, and keep in mind they may not be available "off the shelf" from another model, so it's possible that you could need custom cables in order to use these risers. In most cases a simple re-route of the existing hoses, cables or wires may be sufficient.

NOTE: Allow 1 or 2 additional business days for delivery of this item. 

Risers accept all 1 1/8 inch handlebars. Permits handlbars to be placed closer to the rider to reduce the reach on V11 Coppa Italia, V11 Cafe Sport, V11 Scura R, and V11 Sport Ballabio, and Griso with 1-1/8 inch handlebars.  28mm (1 1/8 inch) ROX Elite pivoting handlebar riser, 2" rise. Aluminum risers clamp into 1-1/8 inch handlebar clamps and permit raising or moving the handlebar forward or toward the rider by 2 inches. Please note that longer control cables, brake hoses, and/or wires maybe required, and keep in mind they may not be available "off the shelf" from another model, so it's possible that you could need custom cables in order to use these risers. In most cases a simple re-route of the existing hoses, cables or wires may be sufficient. NOTE: Allow 1 or 2 additional business days for delivery of this item. 

This same part number may also be presented in these alternate formats