Polished lever for round Brembo master cyilnders GU17605652

  • Part Number: 17605652
  • Manufactured by: Moto Guzzi
MG Cycle 21.62
$21.62

In stock IN STOCK

Quantity:
+
-

079554344  Polished aluminum brake lever for round reservoir PS12 to PS17 Brembo master cylinders as found on Moto Guzzi, Ducati, Benelli, Laverda. Includes adjustment screw. Pivot hole is 6mm diameter. Pivot bushing can be drilled out for use on those master cylinders requiring a 7mm hole.

Moto Guzzi: V50 Monza, V50III, 850T3, SP1000, V1000G5, 850 LeMans, LeMans II, LeMans III, CX100, California II, V65C, V65SP.  This lever is also suitable for the earlier version round Brembo master cylinders as used on Eldorado disk brake, V7 Sport disk brake, 750S, and 850T.

Ducati: 350 GTV 1978-1980, 350 Twin, 500 Pantah SL 1981-1983, 600 Pantah SL 1981-1984, 750 SS Bevel 1972-1974, 860 GTS 1976-1979, 900 GT/ GTS 1976-1978, 900 MHR 1983-1985, 900 SD Darmah 1977-1983, 900 SS Bevel 1975-1980.

 Benelli: 250 2C, 500 LS

079554344  Polished aluminum brake lever for round reservoir PS12 to PS17 Brembo master cylinders as found on Moto Guzzi, Ducati, Benelli, Laverda. Includes adjustment screw. Pivot hole is 6mm diameter. Pivot bushing can be drilled out for use on those master cylinders requiring a 7mm hole.Moto Guzzi: V50 Monza, V50III, 850T3, SP1000, V1000G5, 850 LeMans, LeMans II, LeMans III, CX100, California II, V65C, V65SP.  This lever is also suitable for the earlier version round Brembo master cylinders as used on Eldorado disk brake, V7 Sport disk brake, 750S, and 850T.Ducati: 350 GTV 1978-1980, 350 Twin, 500 Pantah SL 1981-1983, 600 Pantah SL 1981-1984, 750 SS Bevel 1972-1974, 860 GTS 1976-1979, 900 GT/ GTS 1976-1978, 900 MHR 1983-1985, 900 SD Darmah 1977-1983, 900 SS Bevel 1975-1980. Benelli: 250 2C, 500 LS

This same part number may also be presented in these alternate formats

  • 17605652
  • 1760 5652
  • 1760.5652
  • 17 60 56 52
  • 17.60.56.52
  • GU17605652