Flip top choke, VHB & PHF carbs, not V700 or Ambo Dellorto 8293

  • Part Number: 14937800
  • Manufactured by: Moto Guzzi
MG Cycle 14.08
$14.08

In stock IN STOCK

Quantity:
+
-

Flip top choke assembly for most VHB 27, 29, 30, VHBT and PHF30 through PHF36 carbs. By installing these carburetor mounted flip open choke levers you can eliminate the remote choke lever and the attached cables for a cleaner, simpler installation.

These individual choke/enrichener assemblies were either original to, or can be fitted to these Guzzi models: Late Ambassador, 850GT, Eldorado with VHB carbs, V7 Sport, 750S, S3, 850T, T3, T4, T5, Convert, CX100, SP1000, SPII, SP III, G5, California II, California III with PHF carhs, 1000S with PHF carbs, MilleGT, Strada, California 1100. Does not fit some of the above models that are equipped with PHM carbs. 

Note: Most Ambassador models did not have orings sealing the choke holes. These early VHB 29 carbs were not counter bored to accept the protrusion and oring underneath the cap. If your Ambassador has VHB carbs without an oring sealing the choke hole cover to the carb body, these will not fit. Please be sure your carbs will accept these chokes before ordering.

Can also be fitted to VHB 27, 29 or 30, as well as PHF carburetors as found on Morini, Aermacchi/Harley, Ducati and other brands of motorcycle. Dellorto number 8293

 

Flip top choke assembly for most VHB 27, 29, 30, VHBT and PHF30 through PHF36 carbs. By installing these carburetor mounted flip open choke levers you can eliminate the remote choke lever and the attached cables for a cleaner, simpler installation.These individual choke/enrichener assemblies were either original to, or can be fitted to these Guzzi models: Late Ambassador, 850GT, Eldorado with VHB carbs, V7 Sport, 750S, S3, 850T, T3, T4, T5, Convert, CX100, SP1000, SPII, SP III, G5, California II, California III with PHF carhs, 1000S with PHF carbs, MilleGT, Strada, California 1100. Does not fit some of the above models that are equipped with PHM carbs.  Note: Most Ambassador models did not have orings sealing the choke holes. These early VHB 29 carbs were not counter bored to accept the protrusion and oring underneath the cap. If your Ambassador has VHB carbs without an oring sealing the choke hole cover to the carb body, these will not fit. Please be sure your carbs will accept these chokes before ordering.Can also be fitted to VHB 27, 29 or 30, as well as PHF carburetors as found on Morini, Aermacchi/Harley, Ducati and other brands of motorcycle. Dellorto number 8293  

This same part number may also be presented in these alternate formats